Bafang MG62 Fatbike 170mm
Bafang G62 Standard Wind (8.0 RPM/V) Rear Hub Motor for 170-175mm Fat Bike Dropouts. Terminated with L10 Waterproof Motor Plug.
The Bafang G62 is a rear geared hub motor that is designed for fat bike installations with 170-175mm dropout lengths. This is the most powerful 1000W nominal fat bike motor from Bafang and uses a heavier gauge wire and connector than the common 500/750W options. It runs a cassette freehub rather than a screw-on freewheel for modern derailleur systems and has a disc mount as well. The hub shell includes an internal 6-pole speedometer sensor for speed readings. This motor has a 6.5T winding that provides 8.0 RPM/V typically suited for 26" wheels.
Uses L10 waterproof connector for the motor phase, hall, and speedometer that is compatible with our Baserunner_L10 motor controllers.
|Country of Manufacture||China|
|Actual Weight (kg)||4.86|
|Motor Power Range (Watts)||1000-2000|
|Motor KV (RPM / V)||8.0|
|Disk Brake Compatible||Yes|
|Axle Length (O.L.D.)||170|
|Spoke Holes||36 Hole|
|Flange Spoke Diameter (mm)||143|
|Magnetic Pole Pairs (Phaserunner)||50|
|Speedo Poles (for CA)||6|