MG311 Standard Wind, Unlaced
Bafang G311 Standard Wind (8.4 rpm/V) Front Geared Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug with Combined Speed + Thermistor Signal. Meant for 24", 26" and 700c Wheels.
The Bafang G311 front motor is a compact disk compatible 2.3kg rear hub with a nominal 250-350 watt power rating that works great for stealthy systems that do not require significant assist for steep hills or cargo. This motor includes an internal 6-pole speedeometer sensor so it can use a CA device and not require an exeternal speedo pickup. It has a spiral gears on the initial reduction of a double stage planetary gear and is exceptionally quiet for a geared motor. This hub is wound with a moderate speed winding (8.4 rpm/V) for 26" and 700c wheels.
Uses 9-pin overmolded Higo Z910 waterproof connector for the motor phase, hall, and combined speedo and thermistor wires. Has internal tabbed washers for anti-torque rotation with the dropouts and a round 10mm axle. Does not work with conventional torque arms.
For more details, see the G31X Geared Motor Info Page
|Country of Manufacture||China|
|Actual Weight (kg)||2.26|
|Motor Power Range (Watts)||250-500|
|Motor KV (RPM / V)||8.4|
|Phase Resistance (Ohm)||0.124|
|Disk Brake Compatible||Yes|
|Thermistor Style||10K NTC, B ~3450 with 10K pullup (Bafang Style) Multiplexed with Speedo|
|Axle Length (O.L.D.)||100|
|Spoke Holes||36 Hole|
|Flange Spoke Diameter (mm)||123|
|Magnetic Pole Pairs (Phaserunner)||88|
|Speedo Poles (for CA)||6|
|Hysteresis Losses (N-m)||0.666|
|Eddie Losses (N-m / rad/sec)||0.015|
|Motor Inductance (H)||0.00021|