Bafang G62 Standard Wind (8.0 RPM/V) Rear Hub Motor for 170-175mm Fat Bike Dropouts. Terminated with L10 Waterproof Motor Plug.
Click Here for detailed product info page
Bafang G62 Standard Wind (8.0 RPM/V) Rear Hub Motor for 190-195mm Fat Bike Dropouts. Terminated with L10 Waterproof Motor Plug.
Click Here for detailed product info page
Labour for Hand Lacing Hub Motor Into Rim
Click Here for detailed product info page
20 Inch, 36 hole, 65mm Wide Weinmann Double Walled Rim, for Fat Bike Tires.
Click Here for detailed product info page
- Out of Stock -
ETA: Sep 15 2022
26 Inch, 36 hole, 65mm Wide Weinmann Double Walled Rim, for Fat Bike Tires
Click Here for detailed product info page
26 Inch, 36 Holes, 80mm Wide, Alex Double Walled Rim, for Fat Bike Motors
Click Here for detailed product info page
Custom Cut Black Sapim Spokes, Butted 13-14 Gauge, Includes Nipple
Click Here for detailed product info page
Custom Cut Silver Pillar Spoke, Butted 13-14 Gauge, Specify Length at Checkout, Includes Nipple
Click Here for detailed product info page
7 Speed DNP Cassette, 11-32 Tooth
Click Here for detailed product info page
8 Speed DNP Cassette, 11-32 Tooth
Click Here for detailed product info page
9 Speed DNP Cassette, 11-32 Tooth
Click Here for detailed product info page
10 Speed DNP Cassette, 11-32 Tooth
Click Here for detailed product info page
36V 14.5 Ah Downtube Battery with Panasonic NCR21700A Cells, 40A BMS
36V 16.5 Ah Downtube Battery with Samsung 35E Cells, Low Profile Reention Casing with on/off Switch
36V 19.3 Ah Downtube Battery with Panasonic NCR21700A Cells, 40A BMS. XLR-ST3 Adapter not included.
36V 24 Ah Downtube Battery with Panasonic 21700 A Cells, 40A BMS, ST3 Charge Port.
36V 26.5 Ah Downtube Battery in Reention DP9 Casing with Panasonic GA Cells, 40A BMS. UN38.3 Certified for Shipping.
- Out of Stock -
48V 19 Ah Downtube Battery with Panasonic 21700 A Cells, 40A BMS, ST3 Charge Port.
UN38.3 Certified for Shipping.
52V 14.5 Ah Downtube Battery with Panasonic NCR21700A Cells, 40A BMS
52V 20 Ah Downtube Battery in Reention DP9 Casing with Samsung 35E Cells, 40A BMS. UN38.3 Certified for Shipping.
Triple Bob and Hose Clamps for Secure Mounting of Hailong-01, 21700, and Reention Downtube Batteries
Also Available on Amazon for US customers
Click Here for detailed product info page
36V 2.0A Lithium Battery Charger 3 pin ST connector for 120VAC only.
Click Here for detailed product info page
36V 4.0A Lithium Battery Charger 3 pin ST connector from ST 100-240V/C8
Click Here for detailed product info page
48V Charger 2.0A ST3 Sealed Plastic Lithium Charger from ST, 110 - 220V compatible
Click Here for detailed product info page
52V (58.8V full charge) 2.0A ST3 Sealed Plastic Lithium Charger from ST, 110 - 220V compatible
Click Here for detailed product info page
52V 4.0A Lithium Battery 3 pin ST connector Charger for 100-240VAC Outlets
Click Here for detailed product info page
Upgrade to a Fast 8A Programmable Charger with the Satiator - Includes XLR-ST3 Adapter
Click Here for detailed product info page
2x Clamp Block for mounting Double and Triple Bobs and eZee Battery Rails to Existing Bicycle Rack. Designed and Made in Canada.
Click Here for detailed product info page
V4 Baserunner_L10 Field Oriented Motor Controller with L1019 Motor Plug for 36V Nominal Batteries (for 48V/52V systems please use V5 Baserunner) . 70A Peak Phase Currents (~45-50A Continuous).
Click Here for detailed product info page
New Model V5 Baserunner_L10 Field Oriented Motor Controller. Flat Profile Fits Many Downtube Battery Enclosures. L1019 Motor Plug. 70A Peak Phase Currents (~45-50A Continuous), for 24-52V Batteries (60V Max Input).
Click Here for detailed product info page
Frankenrunner Controller with Over-molded L1019 Motor Connector and WP8 CA Plug. 87V Max Battery Voltage and 96A Peak Phase Currents (~55A at Thermal Rollback).
Click Here for detailed product info page
V3 Direct Plug Cycle Analyst with Waterproof 8 Pin HiGo CA Plug for Ready to Roll Kits.110 cm cable length. Mounting bracket not included.
Click Here for detailed product info page
Multifunction Switch for CA3-WP, with On/Off Power, Up/Down Digital Aux Buttons, and Screen Toggle. 45 cm cable length.
Click Here for detailed product info page
Stainless Steel Mounting Plate for Attaching CA to Bicycle Steer Tube
Click Here for detailed product info page
Grin Tech Handlebar Mounting Bracket for Cycle Analyst, 100% Stainless Hardware
Click Here for detailed product info page
50cm Thumb Lever Throttle, Universal Left / Right Side Design. Short Cable for Connecting to Cycle Analyst.
Click Here for detailed product info page
New Thumb Lever Throttle, Universal Left / Right Side Design
Click Here for detailed product info page
New Universal Lever Thumb Throttle with Clamp On Handlebar Mount
Click Here for detailed product info page
New Extra Slim Split Grin Twist Throttle, 36mm OD Fits Under Lever Shifters. 50cm cable length for CA3. Requires ID of Handlebar Tube 17mm or Larger. Won't Fit with Aluminum Handlebars with Thick Sidewalls.
Click Here for detailed product info page
New Extra Slim Split Grin Twist Throttle, 36mm OD Fits Under Lever Shifters. 50cm Cable Length for CA3. Requires ID of Handlebar Tube 17mm or Larger. Won't Fit with Aluminum Handlebars with Thick Sidewalls.
Click Here for detailed product info page
CA3 Compatible Quadrature PAS Sensor, Split 12 Magnet Ring for Square Taper Spindle Mount
Click Here for detailed product info page
CA3 Compatible Quadrature PAS Sensor, with Split 12 Magnet Ring for Chainring Mount. Must have Steel Chainring bolts. For 74mm 5 Bbolt and 64mm 4 Bolt Cranksets.
Click Here for detailed product info page
CA3 Compatible Mini PAS Sensor with 24 Poles for Immediate Engagement. For Square Taper Spindles with at Least 5mm of Exposed Spindle. Standard 90cm Cable Length
Click Here for detailed product info page
NCTE Square Taper Torque Sensor (Similar to THUN), Standard Length 120mm Spindle Suitable for Most Bikes.
Click Here for detailed product info page
NCTE Square Taper Torque Sensor (Similar to THUN), Long 128mm Spindle.
Click Here for detailed product info page
NCTE Square Taper Torque Sensor (Similar to THUN), Extra Long 136mm Spindle.
Click Here for detailed product info page
ERider-T9N Torque Sensor for 68mm BB Shells with 170mm Miranda Cranks and 4 Bolt 104mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included. NOTE: Certain ERider setups are succeptible to electrical noise from the controller causing intermittent cutout behavior. This can be solved by grounding the bicycle frame.
Click Here for detailed product info page
ERider-T9N Torque Sensor for 68mm BB Shells with 170mm Miranda Cranks and 5 Bolt 130mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included. NOTE: Certain ERider setups are succeptible to electrical noise from the controller causing intermittent cutout behavior. This can be solved by grounding the bicycle frame.
Click Here for detailed product info page
ERider-T9N Torque Sensor for 73mm BB Shells with 170mm Miranda Cranks and 4 Bolt 104mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included
Click Here for detailed product info page
ERider-T9N Torque Sensor for 73mm BB Shells with 170mm Miranda Cranks and 5 Bolt 130mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included. NOTE: Certain ERider setups are succeptible to electrical noise from the controller causing intermittent cutout behavior. This can be solved by grounding the bicycle frame.
Click Here for detailed product info page
ERider Torque Sensor and Crankset for 68mm Wide Bottom Bracket Shells with 4 bolt 104mm Spider, 52T Narrow-Wide Chainring and Zero Q-Factor 165mm Miranda Cranks. Side Cable Exit.
Click Here for detailed product info page
ERider Torque Sensor and Crankset for 73mm Wide Bottom Bracket Shells with 4B 104mm Spider, 52T Narrow-Wide Chainring and Zero Q Factor 165mm Miranda Cranks. Side Cable Exit.
Click Here for detailed product info page
Dual Left and Right Ebrake levers with Single JST Connector
Click Here for detailed product info page
Pull Tripwire, Universal Ebrake Sensor for Mechanical and Some Hydraulic Levers.
Full Product Information Page
Click Here for detailed product info page
Push Tripwire, Universal Ebrake Sensor for Most Hydraulic Levers. Full Product Information Page
Click Here for detailed product info page
Magura MT7e Brake and lever. Pre-Bled. 2200mm. Flip Flop lever. Cut to length.
- Out of Stock -
ETA: Feb 1 2023
GRIN Universal Rear Torque Arm, thick 1/4 inch stainless steel. Thick 1/4" Stainless Plate. Full Product Information Page
Click Here for detailed product info page