We have Moved! 

After heroic efforts by the team here Grin is now operating out of our new 14,000 square foot facility on Odlum Drive.  Basic orders are being shipped out again and more complex kits and wheelbuilds should start moving the first week of February. 


Baserunner_Z9 - Stand Alone

Grin Baserunner, Stand Alone model with WP8 CA plug supports Themsitors, Speed Signal, or Both on White Signal Wire. 60V Max and 55A Peak Phase Currents (~30-35A Continuous).

Full Product Information Page

USD$180.00
Availability: In stock
SKU
C-Baserunner_Z9_SA

The Baserunner is a compact field-oriented motor controller originally designed to fit inside battery downtubes. This version is configured for installations that aren't using a downtube battery pack. The battery cable exits the rear of the controller along with all the other cables and the enclosure casting is a bit wider as a result. This device uses the WP8 CA plug and can support speed signals, temperature signals, or combined temp+speed signals on the white wire of the Z910 connector.

It is compatible with up to 14s (58V) battery packs and is terminated with a Z910 waterproof HiGo motor plug. Cables and connectors are otherwise identical to the Phaserunner, and remote on/off switch wires are present under the throttle heatshrink. Requires computer setup to mate and configure with a given motor, and this requires the USB->TTL communications cable if you don't already have that. Requires CA3-WP and MFSwitch or separately wired on/off switch to turn on. Full Baserunner Information Page.

More Information
Country of Manufacture Canada
ETA May 23, 2019
Dimensions (L x W x H, mm) 90 x 55 x 15
Actual Weight (kg) 0.18
Max Battery Amps (A) 30
Battery Range (V) 20-60
Low Voltage Cutoff (V) Programmable
MOSFETs 6x 8mOhm
Connector(s) Anderson, JST-SM, TRRS, WP8 (HiGo 0812), Z910
We found other products you might like!