Language
International
  • Compare ()
  • Create an Account
  • Sign In
Cart 0
Toggle Nav
Search
Advanced Search
Menu
Account
Settings
Language
International
main product photo
Loading...

Rear Fatbike Ready-to-Roll Kit

Ready to Ride Fatbike G60 Kit, with V3 Cycle Analyst, Downtube battery, PAS/Torque sensor options.

From USD$628.00

To USD$2,371.00

In stock

SKU
KIT-Fat_RTR
Add to Wish List Add to Compare
Customize Rear Fatbike Ready-to-Roll Kit

* Required Fields

Your Customization
Ready to Roll Kit based on Rear G310 Motor, Downtube Battery with Baserunner Controller, CA3 with PAS Options etc.
Rear Fatbike Ready-to-Roll Kit

In stock

USD$628.00

Actual cruising speed/perfomance under any loading conditions is well modeled in our simulator. NEW! Launch Motor Simulator with Rear Fatbike Ready-to-Roll Kit

Summary
    MG60 Fatbike
    Actual Weight (kg)
    4.2
    Motor MFG
    Bafang
    Motor Power Range (Watts)
    500-1000
    Motor KV (RPM / V)
    8.2
    Phase Resistance (Ohm)
    0.080
    Disk Brake Compatible
    Yes
    Spoke Holes
    36 Hole
    Flange Spoke Diameter (mm)
    145
    Magnetic Pole Pairs (Phaserunner)
    50
    Hysteresis Losses (N-m)
    0.58
    Eddie Losses (N-m / rad/sec)
    0.022
    MG60 Fat_190
    Actual Weight (kg)
    4.2
    Motor MFG
    Bafang
    Motor Power Range (Watts)
    500-1000
    Motor KV (RPM / V)
    8.2
    Phase Resistance (Ohm)
    0.080
    Disk Brake Compatible
    Yes
    Spoke Holes
    36 Hole
    Flange Spoke Diameter (mm)
    145
    Magnetic Pole Pairs (Phaserunner)
    50
    Hysteresis Losses (N-m)
    0.58
    Eddie Losses (N-m / rad/sec)
    0.022
    Rim20_Fat
    Actual Weight (kg)
    0.82
    Rim Width (mm)
    65
    Spoke Holes
    36 Hole
    Nominal Rim Size
    20" (ISO 406)
    Rim ERD
    384
    Rim Brake Compatible
    No
    Valve Type
    Schrader
    Rim26_Fat
    Actual Weight (kg)
    1.06
    Rim Width (mm)
    65
    Spoke Holes
    36 Hole
    Nominal Rim Size
    26" (ISO 559)
    Rim ERD
    537
    Rim Brake Compatible
    No
    Valve Type
    Schrader
    Rim26_Fat80
    Actual Weight (kg)
    .830
    Rim Width (mm)
    80
    Spoke Holes
    36 Hole
    Nominal Rim Size
    26" (ISO 559)
    Rim ERD
    542
    Rim Brake Compatible
    No
    CS7Spd1132
    Actual Weight (kg)
    0.226
    CS8Spd1132
    Actual Weight (kg)
    0.286
    CS8Spd1132_SR
    Actual Weight (kg)
    0.286
    CS9Spd1132
    Actual Weight (kg)
    0.364
    CS10Spd1132
    Actual Weight (kg)
    0.364
    CS10Spd1134_SR
    Actual Weight (kg)
    0.364
    B3615Li-DT
    Actual Weight (kg)
    3.15
    Dimensions (L x W x H, mm)
    365x95x100
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    14.5
    Cell Type
    Panasonic NCR21700A 10S x 3P
    B3617LiM-DT
    Actual Weight (kg)
    3.54
    Dimensions (L x W x H, mm)
    370x89x90
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    16.8
    Cell Type
    Samsung INR 1865035E 10S x 5P
    Internal Resistance (Ohms)
    0.1
    B3620Li-DT
    Actual Weight (kg)
    4.02
    Dimensions (L x W x H, mm)
    365x95x100
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    19.25
    Cell Type
    Panasonic NCR21700A 10S x 4P
    B3626LiM-DT
    Actual Weight (kg)
    5.18
    Dimensions (L x W x H, mm)
    370x89x137
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    26.5
    Cell Type
    Panasonic NCR18650GA 10S x 8P
    Internal Resistance (Ohms)
    0.06
    B4816LiM-DT
    Actual Weight (kg)
    4.30
    Dimensions (L x W x H, mm)
    370x89x108
    Mounting Type
    Frame Mount
    Nominal Voltage
    48 Volt (13s)
    Full Charge Voltage
    54.6
    Capacity (Amp-Hours)
    16.5
    Cell Type
    Panasonic NCR18650GA 13S x 5P
    Internal Resistance (Ohms)
    0.14
    B5215Li-DT
    Actual Weight (kg)
    4.28
    Dimensions (L x W x H, mm)
    380x95x100
    Mounting Type
    Frame Mount
    Nominal Voltage
    52 Volt (14s)
    Full Charge Voltage
    58.8
    Capacity (Amp-Hours)
    14.5
    Cell Type
    Panasonic NCR21700A 14S x 3P
    B5220LiM-DT
    Actual Weight (kg)
    5.38
    Dimensions (L x W x H, mm)
    370x89x137
    Mounting Type
    Frame Mount
    Nominal Voltage
    52 Volt (14s)
    Full Charge Voltage
    58.8
    Capacity (Amp-Hours)
    19.8
    Cell Type
    Panasonic NCR18650GA 14S x 6P
    Internal Resistance (Ohms)
    0.12
    B4819LiM-DT
    Actual Weight (kg)
    4.9
    Dimensions (L x W x H, mm)
    365x100x124
    Mounting Type
    Frame Mount, Rear Rack
    Nominal Voltage
    48 Volt (13s)
    Full Charge Voltage
    54.6
    Capacity (Amp-Hours)
    19
    Cell Type
    Panasonic 27100 A 13S x 4P
    Internal Resistance (Ohms)
    0.10
    Baserunner_Z9
    Dimensions (L x W x H, mm)
    90 x 55 x 15
    Actual Weight (kg)
    0.18
    Max Battery Amps (A)
    30
    CA3-WPx
    ETA
    Jul. 18, 2021
    Actual Weight (kg)
    0.2900
    36V 2A Anderson Charger 100-240VAC
    Actual Weight (kg)
    0.5
    36V 2A Anderson Charger 220VAC
    Actual Weight (kg)
    0.5
    36V 2A ST3 Charger
    Actual Weight (kg)
    0.36
    36V 2A XLR Charger 110VAC
    Actual Weight (kg)
    0.5
    36V 4A ST3 Charger 100-240VAC
    Actual Weight (kg)
    0.58
    48V 2A ST3 Charger 100 - 240VAC
    Actual Weight (kg)
    0.48
    52V 2A ST3 Charger
    Dimensions (L x W x H, mm)
    170x72x34
    52V 4A ST-3 Charger 100-240VAC
    Actual Weight (kg)
    0.84
    Satiator Upgrade with ST3 Adapter
    Actual Weight (kg)
    1.06
    PAS_24P
    ETA
    Jun. 15, 2021
    Actual Weight (kg)
    .06
    Sempu_140
    Actual Weight (kg)
    0.32
    Sempu_175
    Actual Weight (kg)
    .5
    NCTE_120
    ETA
    Aug. 5, 2021
    Actual Weight (kg)
    0.3300
    NCTE_128
    Actual Weight (kg)
    0.3300
    NCTE_136
    Actual Weight (kg)
    0.3300
    More Information
    G60 Motor (170mm O.L.D.) Dimensional Diagram (89.96 kB)
    G60 Motor (190mm O.L.D.) Dimensional Diagram (89.93 kB)
    G60 Motor (170mm O.L.D.) Dimensional Diagram (89.96 kB)
    G60 Motor (190mm O.L.D.) Dimensional Diagram (89.93 kB)
    Satiator User Manual for 1.0X Firmware (1.20 MB)
    12 Pole PAS Specifications and Installation Guide (462.79 kB)
    12 Pole PAS Specifications and Installation Guide (462.79 kB)
    24 Pole PAS Specifications and Installation Guide (468.83 kB)
    Sempu Sensor User Manual (726.05 kB)
    Sempu Sensor User Manual (726.05 kB)
    NCTE Bottom Bracket Specifications (532.39 kB)
    NCTE Bottom Bracket Specifications (532.39 kB)
    NCTE Bottom Bracket Specifications (532.39 kB)
    TripWire Pull Specifications (426.56 kB)
    TripWire Push Short Specifications (425.65 kB)
    Complete conversion kit based around the Bafang G60 rear motor for fatbikes. Includes the baserunner motor controller tucked neatly in a downtube battery, the CA3 with accessories and pedal assist systems. This setup includes everything configured out of the box for a fatbike conversion with 170-180mm rear droputs.

    For a full explanation of the various drop-down choices and a comparison of this package versus other motor options, see our Grin Kits Info Page

    For details on this hub in particular, see the G31X Geared Motor Info Page

    For details on the PAS/Torque sensor selection, see the Advanced PAS Kit Info Page

    We found other products you might like!