TDCM IGH Ready-to-Roll Kit

TDCM IGH Ready to Roll Direct Drive Rear Motor Kit, with Downtube Battery, Baserunner Controller, V3 Cycle Analyst and PAS/Torque Sensor Options.

From USD$255.00

To USD$2,241.00

Out of stock

SKU
KIT-TDCM-IGH_RTR
Customize TDCM IGH Ready-to-Roll Kit

* Required Fields

Your Customization
Ready to Roll Kit with G311 Front Motor, Downtube Battery, Baserunner Controller, PAS/Torque sensors etc.
TDCM IGH Ready-to-Roll Kit

Out of stock

USD$255.00

Actual cruising speed/perfomance under any loading conditions is well modeled in our simulator. NEW! Launch Motor Simulator with TDCM IGH Ready-to-Roll Kit

Summary
    IGH_305
    Actual Weight (kg)
    6.54
    Motor MFG
    TDCM
    Motor Power Range (Watts)
    500-1000
    Motor KV (RPM / V)
    8.9
    Phase Resistance (Ohm)
    0.233
    Disk Brake Compatible
    Yes
    Spoke Holes
    36 Hole
    Flange Spoke Diameter (mm)
    210
    Magnetic Pole Pairs (Phaserunner)
    16
    Hysteresis Losses (N-m)
    0.78
    Eddie Losses (N-m / rad/sec)
    0.006
    IGH_395
    Actual Weight (kg)
    6.54
    Motor MFG
    TDCM
    Motor Power Range (Watts)
    500-1000
    Motor KV (RPM / V)
    11.5
    Phase Resistance (Ohm)
    0.163
    Disk Brake Compatible
    Yes
    Spoke Holes
    36 Hole
    Flange Spoke Diameter (mm)
    210
    Magnetic Pole Pairs (Phaserunner)
    16
    Hysteresis Losses (N-m)
    0.78
    Eddie Losses (N-m / rad/sec)
    0.006
    Rim16Frct
    Actual Weight (kg)
    0.2100
    Rim Width (mm)
    20
    Spoke Holes
    36 Hole
    Nominal Rim Size
    16" (ISO 349)
    Rim ERD
    328
    Rim Brake Compatible
    Yes
    Valve Type
    Schrader
    Rim16_ZAC19
    Actual Weight (kg)
    0.6
    Rim Width (mm)
    25
    Spoke Holes
    36 Hole
    Nominal Rim Size
    16" (ISO 349)
    Rim ERD
    332
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    Rim20_Alex
    Actual Weight (kg)
    0.48
    Rim Width (mm)
    32
    Spoke Holes
    36 Hole
    Nominal Rim Size
    20" (ISO 406)
    Rim ERD
    390
    Rim Brake Compatible
    Yes
    Valve Type
    Schrader
    Rim20_ZAC19
    Actual Weight (kg)
    0.32
    Rim Width (mm)
    24
    Spoke Holes
    36 Hole
    Nominal Rim Size
    20" (ISO 406)
    Rim ERD
    389
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    Rim20_Weinmann
    Actual Weight (kg)
    0.42
    Rim Width (mm)
    30
    Spoke Holes
    36 Hole
    Nominal Rim Size
    20" (ISO 406)
    Rim ERD
    394
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    Rim20_Fat
    Actual Weight (kg)
    0.82
    Rim Width (mm)
    65
    Spoke Holes
    36 Hole
    Nominal Rim Size
    20" (ISO 406)
    Rim ERD
    384
    Rim Brake Compatible
    No
    Valve Type
    Schrader
    Rim24_P17A
    Actual Weight (kg)
    0.43
    Rim Width (mm)
    23
    Spoke Holes
    36 Hole
    Nominal Rim Size
    24" (ISO 507)
    Rim ERD
    490
    Rim Brake Compatible
    Yes
    Valve Type
    Schrader
    Rim26_ZAC19
    Actual Weight (kg)
    0.46
    Rim Width (mm)
    23.6
    Spoke Holes
    36 Hole
    Nominal Rim Size
    26" (ISO 559)
    Rim ERD
    540.33
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    Rim26_Alex
    Actual Weight (kg)
    0.76
    Rim Width (mm)
    32
    Spoke Holes
    36 Hole
    Nominal Rim Size
    26" (ISO 559)
    Rim ERD
    544
    Rim Brake Compatible
    Yes
    Valve Type
    Schrader
    Rim26_Weinmann
    Actual Weight (kg)
    0.6
    Rim Width (mm)
    30
    Spoke Holes
    36 Hole
    Nominal Rim Size
    26" (ISO 559)
    Rim ERD
    545
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    Rim26_Fat
    Actual Weight (kg)
    1.06
    Rim Width (mm)
    65
    Spoke Holes
    36 Hole
    Nominal Rim Size
    26" (ISO 559)
    Rim ERD
    537
    Rim Brake Compatible
    No
    Valve Type
    Schrader
    Rim275_Alex
    Actual Weight (kg)
    0.76
    Rim Width (mm)
    32
    Spoke Holes
    36 Hole
    Nominal Rim Size
    650B (ISO 584)
    Rim ERD
    565
    Rim Brake Compatible
    Yes
    Valve Type
    Schrader
    Rim700_ZAC19
    Actual Weight (kg)
    0.5
    Rim Width (mm)
    23.6
    Spoke Holes
    36 Hole
    Nominal Rim Size
    700C (ISO 622)
    Rim ERD
    603.86
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    Rim700_Weinmann
    Actual Weight (kg)
    0.65
    Rim Width (mm)
    30
    Spoke Holes
    36 Hole
    Nominal Rim Size
    700C (ISO 622)
    Rim ERD
    609
    Rim Brake Compatible
    Yes
    Valve Type
    Presta, Schrader
    B3615Li-DT
    Actual Weight (kg)
    3.15
    Dimensions (L x W x H, mm)
    365x95x100
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    14.5
    Cell Type
    Panasonic NCR21700A 10S x 3P
    B3617LiM-DT
    Actual Weight (kg)
    3.54
    Dimensions (L x W x H, mm)
    370x89x90
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    16.8
    Cell Type
    Samsung INR 1865035E 10S x 5P
    Internal Resistance (Ohms)
    0.1
    B3620Li-DT
    Actual Weight (kg)
    4.02
    Dimensions (L x W x H, mm)
    365x95x100
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    19.25
    Cell Type
    Panasonic NCR21700A 10S x 4P
    B3626LiM-DT
    Actual Weight (kg)
    5.18
    Dimensions (L x W x H, mm)
    370x89x137
    Mounting Type
    Frame Mount
    Nominal Voltage
    36 Volt (10s)
    Full Charge Voltage
    42.0
    Capacity (Amp-Hours)
    26.5
    Cell Type
    Panasonic NCR18650GA 10S x 8P
    Internal Resistance (Ohms)
    0.06
    B4816LiM-DT
    Actual Weight (kg)
    4.30
    Dimensions (L x W x H, mm)
    370x89x108
    Mounting Type
    Frame Mount
    Nominal Voltage
    48 Volt (13s)
    Full Charge Voltage
    54.6
    Capacity (Amp-Hours)
    16.5
    Cell Type
    Panasonic NCR18650GA 13S x 5P
    Internal Resistance (Ohms)
    0.14
    B5215Li-DT
    Actual Weight (kg)
    4.28
    Dimensions (L x W x H, mm)
    380x95x100
    Mounting Type
    Frame Mount
    Nominal Voltage
    52 Volt (14s)
    Full Charge Voltage
    58.8
    Capacity (Amp-Hours)
    14.5
    Cell Type
    Panasonic NCR21700A 14S x 3P
    B5220LiM-DT
    Actual Weight (kg)
    5.38
    Dimensions (L x W x H, mm)
    370x89x137
    Mounting Type
    Frame Mount
    Nominal Voltage
    52 Volt (14s)
    Full Charge Voltage
    58.8
    Capacity (Amp-Hours)
    19.8
    Cell Type
    Panasonic NCR18650GA 14S x 6P
    Internal Resistance (Ohms)
    0.12
    36V 2A ST3 Charger
    Actual Weight (kg)
    0.36
    36V 4A ST3 Charger 100-240VAC
    Actual Weight (kg)
    0.58
    52V 4A ST-3 Charger 100-240VAC
    Actual Weight (kg)
    0.84
    Satiator Upgrade with ST3 Adapter
    Actual Weight (kg)
    1.06
    V4 Baserunner_L10 Controller
    Dimensions (L x W x H, mm)
    90 x 55 x 15
    Actual Weight (kg)
    0.18
    Max Battery Amps (A)
    40
    Phaserunner_L10_Bk
    ETA
    Jun. 9, 2021
    Dimensions (L x W x H, mm)
    99 x 40 x 34
    Actual Weight (kg)
    0.26
    Max Battery Amps (A)
    50
    Phaserunner_L10
    ETA
    Nov. 14, 2022
    Dimensions (L x W x H, mm)
    99 x 40 x 34
    Actual Weight (kg)
    0.26
    Max Battery Amps (A)
    50
    C4825-L10
    Dimensions (L x W x H, mm)
    110 x 71 x 34
    Actual Weight (kg)
    0.4900
    Max Battery Amps (A)
    25
    C4835-L10
    Dimensions (L x W x H, mm)
    154 x 87 x 46
    Actual Weight (kg)
    0.7500
    Max Battery Amps (A)
    35
    C7240-L10
    Dimensions (L x W x H, mm)
    154 x 87 x 46
    Actual Weight (kg)
    0.6600
    Max Battery Amps (A)
    40
    CA3-WPx
    ETA
    Jul. 18, 2021
    Actual Weight (kg)
    0.2900
    PAS_24P
    ETA
    Jun. 15, 2021
    Actual Weight (kg)
    .06
    Sempu_115
    ETA
    Mar. 14, 2018
    Actual Weight (kg)
    0.32
    Sempu_122
    Actual Weight (kg)
    0.32
    Sempu_128
    ETA
    Mar. 14, 2018
    Actual Weight (kg)
    0.32
    Sempu_140
    Actual Weight (kg)
    0.32
    ERider68_4B
    ETA
    Sep. 29, 2021
    Actual Weight (kg)
    1.06
    ERider68_5B
    ETA
    Sep. 29, 2021
    Actual Weight (kg)
    1.06
    ERider73_4B
    Actual Weight (kg)
    1.06
    ERider73_5B
    Actual Weight (kg)
    1.06
    NCTE_120
    ETA
    Aug. 5, 2021
    Actual Weight (kg)
    0.3300
    NCTE_128
    Actual Weight (kg)
    0.3300
    NCTE_136
    Actual Weight (kg)
    0.3300
    More Information

    Rear TDCM IGH direct drive Ready to Roll kit with downtube battery and integrated Baserunner_L10 motor controller. Hub has internal 5 speed Sturmey Archer hub. The motor is available in 2 different windings, the fast option is most often used with smaller 20" rims, while the standard hub is more appropriate for regular 24"-700c wheels. Motors are all stocked unlaced, and feature 0.35mm laminations, a Statorade injection port, and the L10 connector with internal thermistor. For a hand built wheel, please select the rim, spokes, and wheel lacing labour items as well, and expect a 3-4 day additional wheel building delay. Kit includes various PAS or Torque Sensor Options for the V3 Cycle Analyst

    For a full explanation of the various drop-down choices and a comparison of this package versus other motor options, see our Grin Kits Info Page

    For details on the PAS/Torque sensor selection, see the Advanced PAS Kit Info Page

     

     

     

    We found other products you might like!