Baserunner_L10 Controller -V4

New Model V4 Baserunner_L10 Field Oriented Motor Controller. Flat Profile Fits Many Downtube Battery Enclosures. L1019 Motor Plug. 80A Peak Phase Currents (~45-50A Continuous), for 24-52V Batteries (60V Max Input). 

Baserunner_L10 Must Use the Newest Phaserunner Suite V1.5.1.

Full Product Information Page

From USD$250.00

To USD$295.00

In stock

Customize Baserunner_L10 Controller -V4

* Required Fields

Your Customization
Phasernuner_MT V3 Side View
Baserunner_L10 Controller -V4

In stock


    V4 Baserunner_L10 Controller
    Dimensions (L x W x H, mm)
    90 x 55 x 15
    Actual Weight (kg)
    Max Battery Amps (A)
    More Information

    The Baserunner_L10 is a compact field-oriented motor controller and enclosure that fits inside the Hailong and Reention downtube battery cradles. It is compatible with up to 14s (58V) battery packs, supports up to 80A peak phase current, and is terminated with an L1019 waterproof HiGo motor plug.
    New V4 Model uses only waterproof signal plugs:

              8-pin HiGo plug for CA3-WP control (To convert the WP8 to a classic CA-DP, you must purchase an adapter.)

              9-pin Cusmade Mains signal plug for harnesses to 3rd party displays, alternately use to power rear light 

              6-pin HiGo MiniB for direct PAS or Torque Sensor when using 3rd party displays

    The baserunner purchased on its own has bare + and - lead wires that will need to be soldered to the pins of the connector present in your original base plate. We do separately sell spare spade and bullet connector sets if desired. 

    A computer setup is required to configure this controller to a given motor, and this requires the USB->TTL communications cable if you don't already have one. Users without an on-off switch on their battery should expect to wire in a separate switch on their own. Full Baserunner Information Page.