- 60 day exchange policy on items that are in new and unused condition
- Full value of original product(s) will be applied to new order
- Shipping cost will need to be paid on the new order
- See our Return Shipping Procedure below for important information about sending back products
- 30 day return policy on items that are in new and unused condition
- 15% restocking fee may be applied at our discretion
- No refunds on shipping, customs/import fees, custom cut spokes, or labour
- See our Return Shipping Procedure below for important information about sending back products
- 3 years on products designed and manufactured by GRIN (All Axle hub motor, Satiator charger, Phasernuner/Baserunner controller, Cycle Analyst Display, LiGo batteries etc.)
- 2 years on specific 3rd party products heavily customized by Grin (GMAC motor)
- 1 year on all 3rd party products (Crystalyte/eZee/9C/Bafang motors, Downtube batteries, Grinfineon controllers, generic chargers etc.)
- GRIN will repair or replace your item at our discretion
- We will require you to go through a troubleshooting procedure prior to returning the item to GRIN. A majority of the problems people face do not require return shipment.
- We do not have a "warranty void if opened" policy on any of our products or use that as an excuse to deny warranty. In fact, quite the contrary, we will usually require you to open up an item in order to help with troubleshooting and diagnostics before we will issue a warranty. We want our customers to become familiar with that is under the hood of their ebike.
- We support your Right To Repair - see details below
- See our Return Shipping Procedure below for important information about warranty shipping and costs
- Exclusions apply, see specific item types below for details.
BC eBike Rebate Program
We do not accept returns from customers who participate in the BC E-Bike Rebate Program. We cannot provide you with a cash, debit refund, credit card refund, cash equivalent gift card or merchandise credit. Please make sure your decision to purchase an E-Bike is final.
If you are a customer who participated in the BC E-Bike Rebate Program and your E-Bike is in some way defective, it may only be exchanged for another E-Bike of equal value (same cost/price) or higher.
Product Specific Policies
Motor warranty covers material and manufacturing defects in the motor itself, and not issues related to installation or misuse. For instance, the following are not covered by our warranty:
- Problems resulting from Axle Spin-out: Probably the most common reason motors need servicing is because the axle is not properly restrained from spinning in the bicycle dropout. That is an installation issue and not a faulty motor issue. In fact, it means that the motor is doing exactly as it should. You can get axle spinout from: forgetting to adequately tighten the nuts, regen systems causing nuts to loosen, lack of a torque arm for systems that need a torque arm, improper torque arm installation, inadequate dropout strength, etc. When a spinout occurs, it can damage the threads on the axle, it can sever the motor phase wires, it can short the phase wires against your hall sensors and fry the hall sensors and in some cases the motor controller as too. It can also cause your bike to crash and have other consequences. Many of these things can be repaired, but none will be under warranty.
- Water damage: Even on motors that are relatively well sealed, water can still get inside the motor if the connectors are exposed in a way that water can puddle up and track inside the cable housing. The consequences of water getting in the hub are corrosion of the steel stator, and eventual misbehaviour of the hall signals. Most of the time simply cleaning and drying out the hub will restore normal operation. It is very apparent when a motor has water damage, because on opening up the hub a small pool of rusty water will pour out.
- Overheating damage: Motors that are run for prolonged periods at well beyond their rated power levels will eventually get so hot inside as to cook the windings. This results in the enamel burning off the copper wire, the plastic insulation melting on the phase wires, demagnetization of the rare-earth magnets, and vaporization of oil from the ball bearings. Damage caused from running the motors above these levels is not covered under warranty. Higher power levels can work fine for short time periods, but in sustained use the above problems will show up. High power users should always get a motor with a thermistor temperature sensor and a V3 Cycle Analyst to activate thermal rollback.
- Broken Spokes: Spokes breaking is not something unique to hub motors but is something that can happen to bicycle wheels in general. Heavy loads, hitting potholes at high speeds, and neglecting to periodically check and adjust spoke tension, are all common causes of broken spokes. We recommend checking your spoke tension after the first 2 weeks of riding the bike, as even a wheel that is tight out of the box may need a break in period for the spoke heads to seat properly in the flange. We have very few issues with spoke failures on our custom built wheels, but we cannot give quite the same guarantee for prelaced hub motors.
- Grinfineon Controller that fails when used with a motor not sold by GRIN: We can't really warranty infineon style controllers that are used with 3rd party motor systems. It is possible to have a hub with very low winding resistance (think short circuit) which would fry the controller mosfets when throttling from a stall, as these controllers have pulse-by-pulse current limiting to protect them in this situation. In particular, the 20A controller model is succeptible to this.
- Corrosion of connectors from water exposure: Damage to connectors themselves is not a warranty issue. It is a good idea to cover the connectors in a protective box if they are otherwise exposed to road spray.
- Water Ingress in eZee Controllers: There are clear installation instructions with the eZee motor controller to keep the cable exit pointing down so that water cannot enter through the wire grommets. Most of the erratic behavior traced to water inside the controller is installation that have cables pointing up.
- Controllers that are used above the rated voltage: Exposure of a motor controller to higher than the rated maximum voltage can fry the mosfets. The only controllers we have rated for more than 52V nominal batteries are the Phaserunner and the 72V 40A Grinfineon.
- Self-Discharge Damage: Lithium batteries that have self discharged below 2V/cell from being left on the shelf for an extended period of time
- TIP: Lithium batteries are liable to self-discharge over time because the BMS circuit itself draws current from the battery pack. Although the amount of current is usually small ( < 1mA typically) it is still enough to kill a battery in 1-2 months if it is stored in an initially flat state. If you plan to store a lithium battery, be sure it is at least 50% charged when you put it in storage and have it unplgged from the motor controller.
- Water damage: Does not affect the cells but can lead to unreliable BMS circuit behaviour and can in some case lead to corrosion of the tabs. Most batteries have enclosures that shed water well when mounted in their intended orientation, but if they are mounted in an unusual orientation (like vertical, or hanging upside down) there is a higher likelyhood of water getting inside the casing.
- Excessive Current Draw: Frequently running a battery pack at a very high power draw can dramatically shorten the available cycle life from the cells. Our warranty terms apply to batteries that are on average discharged at a 1C rate or lower. If you have a small capacity battery and regularly discharge it at high currents (eg 35A from a 14Ah battery) then the expected cycle life is reduced.
- Submersion damage: While the Cycle Analyst is warrantied against use in rainy conditions, we do not cover damage resulting from submersion of the Cycle Analyst in water.
- Improper wiring: Mistakes while doing custom wiring to the Cycle Analyst circuit board or while wiring to third-party sensors (eg PAS/torque sensors, etc) can easily damage or fry components on the Cycle Analyst. This is a user fault not covered under warranty, though in most cases the board can still be repaired for a fee. The most common failure that we see are people plugging in a torque or PAS sensor that is only rated for 5V power, which will get fried from the 10V present on the CA's PAS power plug and that in turn can damage the Cycle Analyst.
- Improperly running a torque sensor with a 72V battery: As is stated frequently, the total accessory current draw on the Cycle Analyst becomes increasingly limited at higher voltages, and with 72V batteries there is not enough headroom to run a torque sensor which typically draws 20-30mA of current.
- Overvoltage Failures : All of our DC-DC converters and ebike lights have strict maximum voltage limits that need to be respected. People using systems higher than 52V need to pay attention to the voltage rating of any peripheral devices powered from the pack.
- Installation Damage: We see many instances of failures that are traced down to installation problems. For instance, cables getting severed as a result of being pinched by a hose clamp or tangled in a drivetrain. Batteries falling off their mounting cradle because the key wasn't locked. PAS sensors not working because the magnet ring was slipping or misaligned.
- Broken Connectors: We sometimes see people who have damaged connectors from some mechanical incident or mishandling.
Return Shipping Procedure
- Please explain in detail why you think a part is faulty and under exactly what circumstances it failed. Do not just say that the item isn't working, you need to lay it out in great detail.
- We may request you do several additional tests so that we are confident in the diagnosis of which part needs repair
- We will then issue an RMA number
- If the item is being shipped, please write the RMA number clearly on the package label, and send to:
Vancouver, BC V5L 3L9
- Indicate the item is a warranty return (with the exception of UPS where it must be listed as "Temporary Import For Repair"), and that it has a declared value of $10 or less.
- Please do not declare the cost of the broken item as its value, or else there will be brokerage and import charges improperly assessed at the border, and we will likely refuse to accept the shipment.
- It is important that the packaging adequately protects the item from damage during shipping, especially for heavy items like motors
- If you require any advice about how to properly ship a warranty return to us please ask before sending
- We cannot be responsible for damage caused during shipping.
- For warranty items, we will pay to ship the repaired or replacement part back to you
- If we find the items is not defective or has a minor issue that could have been solved without returning the item to GRIN, you are also responsible for the cost of return shipping
Right To Repair
- We always like to work with and support customers who are resourceful enough to fix an issue on their own, and we will provide plenty of tech support over email to guide you through the process.
- It saves wasted time and expense in shipping and it can be a useful and fun learning process.
- Please contact us prior to attempting a DIY repair, however, as some things have non-obvious complications.