ERider73 BB with 52T Chainring

ERider Torque Sensor and Crankset for 73mm Wide Bottom Bracket Shells with 4B 104mm Spider, 52T Narrow-Wide Chainring and Zero Q Factor 165mm Miranda Cranks. Side Cable Exit. 

SKU
BB-ERider73_CRing52T

ERider torque sensor and crankset for 73mm wide bottom bracket shells with a 4 bolt 104mm spider and a 52T narrow-wide chainring and 0 Q factor 165mm Miranda Cranks. Unlike most other bottom bracket torque sensors, the ERider-T9N model has a cable exit from the side of the cartridge and does not require drilling a hole through the frame. This torque sensor accurately measures both left and right pedal torques and enables a very responsive PAS system.

This sensor has an 36 pole single wire cadence sensor and a 1.5V - 3.5V output voltage that is proportional to crank torque with a scaling of 70 Nm/V. Includes 90cm long cable terminated with JST-SM connector, plug-and-play with V3 Cycle Analyst

More Information
Actual Weight (kg) 1.3
Connector(s) Higo Signal C, JST-SM
PAS Poles 36
PAS Encoder Type Single Wire
Sensor Supply Voltage 8-12V
Torque Scale 70 Nm/V
Torque Sensor Offset Voltage 1.5V