Canadian
FH212_Fst
Nine Continent Front Hub Motor, FH212 Model with Proper Bike Alignment, Statorade Ready, and L10 Connector. Fast 10.6 RPM/V Winding
USD$240.00
Availability:
In stock
SKU
M-MFH212_Fst
Nine Continent Front Hub Motor with larger 212mm rotor diameter for higher torque and better copper fill than normal 205mm DD hub motors. 27mm wide stator with 0.35mm laminations for reduced rolling drag and side cable exit for better protection and torque arm installation. Has 100mm front axle length and proper disk rotor alignment and caliper clearance for standard bike fit compatibility. Terminated with new L10 waterproof high power motor connector and includes 10K NTC thermistor for motor temperature sensing and thermal rollback, plus sealed side plates with Statorade injection port via disk rotor hole.
| Country of Manufacture | China |
|---|---|
| Actual Weight (kg) | 6.16 |
| Motor Power Range (Watts) | 600-1200 |
| Motor KV (RPM / V) | 10.2 |
| Phase Resistance (Ohm) | 0.110 |
| Disk Brake Compatible | Yes |
| Connector(s) | L1019 |
| Thermistor Style | 10K NTC, B~3900 |
| Axle Length (O.L.D.) | 100 |
| Axle Threads | M14 x 1.5mm |
| Spoke Holes | 36 Hole |
| Motor Type | Direct Drive |
| Flange Spoke Diameter (mm) | 238 |
| Magnetic Pole Pairs (Phaserunner) | 26 |
| Speedo Poles (for CA) | 26 |
| Hysteresis Losses (N-m) | 0.715 |
| Eddie Losses (N-m / rad/sec) | 0.009 |
| Motor Inductance (H) | 0.00040 |
We found other products you might like!
