Geared Wheelbarrow Motor
This geared wheelbarrow motor has the same internal motor as the popular G311 ebike hubs but with a higher 30:1 gear ratio, giving it plenty of torque at more appropriate speed. The motor has no clutch so can be used for regenerative braking and is an excellent match with our Baserunner motor controller. This motor fits standard 16" wheelbarrow tires and allows you to convert most wheelbarrows to electric assist with a bit of DIY hacking. Comes with a matching inner tube. Tire itself is not included.
Uses 9-pin overmolded Higo Z910 waterproof connector with an internal temperature sensors..
|Country of Manufacture||China|
|Actual Weight (kg)||4.2|
|Motor Power Range (Watts)||250-500|
|Motor KV (RPM / V)||3.1|
|Disk Brake Compatible||Yes|
|Axle Length (O.L.D.)||150|
|Spoke Holes||36 Hole|
|Magnetic Pole Pairs (Phaserunner)||237|
|Hysteresis Losses (N-m)||1.36|
|Eddie Losses (N-m / rad/sec)||.0136|