24 Pole PAS (HiGo Plug)

Mini PAS Sensor with 24 Poles for Immediate Engagement with Short 6 Pin HiGo Connector for Direct Baserunner Hookup. For Square Taper Spindles with at Least 5mm of Exposed Spindle. 

Availability: In stock

Mini 24 Pole PAS sensor for bikes with square taper cranks. This integrated sensor is fully contained and more compact than a conventional exposed magnet ring device, and the 24 PAS poles allows for almost instant power engagement the moment you start pedaling. Internal electronics have been customized to be compatible with the 5-12V operation. 

Installation requires that you have at least 5mm of exposed spindle between the face of the bottom bracket and cranks. Comes with plastic cable guide for bikes that have exposed brake or shifter cables under the bottom bracket. Note two critical measurements: square taper spindle diameter and bottom bracket shell diameter - if your spindle is larger than 16.5mm you may need to file the adapter hole, if your BB shell is larger than 43mm, the sensor may sit at an angle, or need to be modified to install. The product fits best on steel frames.

More Information
Country of Manufacture China
Actual Weight (kg) .06
Connector(s) Higo Signal C
PAS Poles 24
PAS Encoder Type 2 Wire (Quadrature)
Sensor Supply Voltage 5-12V
We found other products you might like!