Geared Wheelbarrow Motor with Tire
Electric Wheelbarrow motor with high 30:1 Gear Reduction Ratio, (3.1 RPM/V), Includes Tire
This geared wheelbarrow motor has the same internal motor as the popular G311 ebike hubs but with a higher 30:1 gear ratio, giving it plenty of torque at more appropriate speed. The motor has no clutch so can be used for regenerative braking and is an excellent match with our Baserunner motor controller.
This motor includes a 16" x 4" tire and is ready for retrofitting on a your DIY electric wheelbarrow, cart, or other low speed transport project.
Uses 9-pin overmolded Higo Z910 waterproof connector with an internal NTC temperature sensor.
|Country of Manufacture||China|
|Actual Weight (kg)||7|
|Motor Nominal Wheel Size||16" (ISO 305)|
|Nominal Rim Size||16" (ISO 305)|
|Motor Power Range (Watts)||250-500|
|Motor KV (RPM / V)||3.1|
|Disk Brake Compatible||Yes|
|Axle Length (O.L.D.)||150|
|Spoke Holes||36 Hole|
|Magnetic Pole Pairs (Phaserunner)||237|
|Hysteresis Losses (N-m)||1.36|
|Eddie Losses (N-m / rad/sec)||.0136|