Canadian
Phaserunner_L10 with Battery Leads
Grin Phaserunner Field Oriented Controller, V6 Model, customized with Battery Leads instead of XT60
- Waterproof 8 pin CA-WP /9 pin Mains / 6 PAS plugs
- Molded L1019 Motor Connector
- 90V Max and 90 A Peak Phase Currents (~45A Continuous)
- Comes in Stainless Silver or Black Metal Shell
In stock
The Phaserunner V6 L10 model comes with a 60cm long integrated phase lead with over-molded locking 10-pin L10 connector that connects to any of our L10-based motors. This controller will handle 90V Max and 90A of Peak Phase Currents (~45A Continuous) and comes in a Stainless Silver or Black Metal Shell
For connection to other ebike peripherals, it has
- 8 pin waterproof CA plug to mate with the CA3-WP device*
- 9 pin Mains connector that can be used for customized connections using the DIY Mains Cable Harness
- For standalone use, connect using the 9 Pin Mains to Throttle and Ebrake Breakout Cable
- 6 pin PAS connector for direct connection to various PAS devices
Power comes though short pair of + and - 12 gauge battery leads that are supplied unterminated.
Must be setup with via a computer to mate and configure with a given motor if they are not purchased together. This requires the USB->TTL communications cable if you don't already have one. Read more at the Full Phaserunner Information Page.
