Crystalyte Rear Thru-Axle Ready-to-Roll Direct Drive Rear Motor Kit, with Downtube Battery, Baserunner or Frankenrunner Controller, V3 Cycle Analyst and PAS/Torque Sensor Options.
Rear Thru-Axle Crystalyte H Series direct drive Ready-to-Roll kit with downtube battery and Frankenrunner controller or integrated Baserunner_L10 motor controller. The H35XX hub options is sized for 142x12 thru axle frames, whilt the H40xx hub is for boost size 148x12.. Compatible with screw-on freewheels only, not cassette freehubs. Motors are all stocked unlaced, and feature 0.35mm laminations, a Statorade injection port, and the L10 connector with internal thermistor. For a hand built wheel, please select the rim, spokes, and wheel lacing labour items as well, and expect a 3-4 day additional wheel building delay. Kit includes various PAS or Torque Sensor Options for the V3 Cycle Analyst
For a full explanation of the various drop-down choices and a comparison of this package versus other motor options, see our Grin Kits Info Page
CA3 Compatible Quadrature PAS Sensor, with Split 12 Magnet Ring for Chainring Mount. Must have Steel Chainring bolts. For 74mm 5 Bbolt and 64mm 4 Bolt Cranksets.
3m Long TTL-> USB programming cable for Satiator, Baserunner, Phaserunner and Cycle Analyst.
*Note: All kits come pre-programmed, and most system behaviour is configurable with the Cycle Analyst buttons. But this cable is necessary if you plan to change more advanced controller settings or update device firmware*
Full Product Info
27.5" (650b) DM24 Alex Rim, 36 hole, 32mm Wide with Stainless Steel Spoke Eyelets
Click Here for detailed product info page
- Out of Stock -
Magura MT4e Brake and lever. Pre-Bled. 2200mm. Flip Flop lever. Cut to length.
- Out of Stock -
New Extra Slim Split Grin Twist Throttle, 36mm OD Fits Under Lever Shifters. 50cm cable length for CA3. Requires ID of Handlebar Tube 17mm or Larger. Won't Fit with Aluminum Handlebars with Thick Sidewalls.
CA3 Compatible Mini PAS Sensor with 24 Poles for Immediate Engagement. For Square Taper Spindles with at Least 5mm of Exposed Spindle. Standard 90cm Cable Length
50cm Thumb Lever Throttle, Universal Left / Right Side Design. Short Cable for Connecting to Cycle Analyst.
Click Here for detailed product info page
- Out of Stock -
New Extra Slim Split Grin Twist Throttle, 36mm OD Fits Under Lever Shifters. 50cm Cable Length for CA3. Requires ID of Handlebar Tube 17mm or Larger. Won't Fit with Aluminum Handlebars with Thick Sidewalls.
NCTE Square Taper Torque Sensor (Similar to THUN), Standard Length 120mm Spindle Suitable for Most Bikes.
Click Here for detailed product info page
- Out of Stock -
NCTE Square Taper Torque Sensor (Similar to THUN), Long 128mm Spindle.
Click Here for detailed product info page
- Out of Stock -
NCTE Square Taper Torque Sensor (Similar to THUN), Extra Long 136mm Spindle.
Click Here for detailed product info page
- Out of Stock -
Grin Phaserunner Field Oriented Controller, New V6 Model
Waterproof 8 pin CA-WP /9 pin Mains / 6 PAS plugs
Molded L1019 Motor Connector
90V Max and 90 A Peak Phase Currents (~45A Continuous)
Comes in Stainless Silver or Black Metal Shell
Full Product Information Page
New Model V5 Baserunner_L10 Field Oriented Motor Controller. Flat Profile Fits Many Downtube Battery Enclosures. L1019 Motor Plug. 70A Peak Phase Currents (~45-50A Continuous), for 24-52V Batteries (60V Max Input).
Click Here for detailed product info page
- Out of Stock -
36V 16.5 Ah Downtube Battery with Samsung 35E Cells, Low Profile Reention Casing with on/off Switch
Triple Bob and Hose Clamps for Secure Mounting of Hailong-01, 21700, and Reention Downtube Batteries. See Product Page for More Information
48V 16.5 Ah Downtube Battery in Reention Casing with Panasonic GA Cells, 40A BMS. ST3 Charge Port.
- Out of Stock -
52V 20 Ah Downtube Battery in Reention DP9 Casing with Panasonic GA Cells, 40A BMS. ST3 Charge Port.Individually Discharge Tested at Grin to Ensure Capacity.
36V 26.5 Ah Downtube Battery in Reention DP9 Casing with Panasonic GA Cells, 40A BMS. UN38.3 Certified for Shipping.
- Out of Stock -
36V 4.0A Lithium Battery Charger 3 pin ST connector from ST 100-240V/C8
CA3 Compatible Mini PAS Sensor with 24 Poles for Immediate Engagement. For Square Taper Spindles with at Least 5mm of Exposed Spindle. Long 120cm Cable Length for Cargo and Recumbent Bikes
Grin Phaserunner Field Oriented Controller, New V6 Model
Waterproof 8 pin CA-WP /9 pin Mains / 6 PAS plugs
Molded L1019 Motor Connector
90V Max and 90 A Peak Phase Currents (~45A Continuous)
Comes in Stainless Silver or Black Metal Shell
Full Product Information Page
27.5" (650b) (ISO 584) Weinmann XM280 Black Rim, 28mm Wide, Disc Brake Only, 36 hole
Click Here for detailed product info page
- Out of Stock -
48V 19 Ah Downtube Battery with Samsung 21700 50G Cells, 40A BMS, ST3 Charge Port.UN38.3 Certified for Shipping, Individually Discharge Tested at Grin to Ensure Capacity.
36V 24 Ah Downtube Battery with Samsung INR21700-50G Cells, 40A BMS, ST3 Charge Port.Individually Discharge Tested at Grin to Ensure Capacity.
V4 Baserunner_L10 Field Oriented Motor Controller with L1019 Motor Plug for 36V Nominal Batteries (for 48V/52V systems please use V5 Baserunner) . 70A Peak Phase Currents (~45-50A Continuous).
Click Here for detailed product info page
- Out of Stock -
ERider-T17N Torque Sensor for 68mm BB Shells with 170mm 0Q Cranks and 4 Bolt 104mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included.
Excellent Deal Bottom Bracket Torque Sensor from Fischer-AG. Senses Left Crank Pedal Force Similar to THUN/NCTE and Requires Drilling Hole in Bottom Bracket for Cable Exit. 127mm Square Taper Spindle and 68mm BB Width.
Canadian
