Canadian
M3540F
Crystalyte UFO (9.5 rpm/V) H3540 Front Motor, Unlaced, with L10 Connector for Phase, Hall Sensors and Thermistor
SKU
M-M3540F
Crystalyte H3540 Front Motor, UFO Design, Hub Only, with hall sensors and thermistor and new L1019 waterproof plug
- 35mm wide stator and magnets
- Full 18mm of space from the disk boss to the side cover, allowing for compatibility with majority of disk calipers
- Statorade compatible with injection port on side cover
- Waterproof locking L1019 motor plug with Hall and Thermistor wires in single tidy connector
- Cable routing through the sides of the axle rather than the ends, better protects the cables from damage and easier to swap nuts, washers, and torque arms on the wire side
- Thermistor for temperature monitoring via the V3 Cycle Analyst
| Country of Manufacture | China |
|---|---|
| Actual Weight (kg) | 6.9 |
| Motor Power Range (Watts) | 600-1200 |
| Motor KV (RPM / V) | 9.5 |
| Phase Resistance (Ohm) | 0.123 |
| Disk Brake Compatible | Yes (with 2.5mm Spacer Washer) |
| Connector(s) | L1019 |
| Axle Length (O.L.D.) | 100 |
| Axle Threads | 1/2" x 20 tpi |
| Spoke Holes | 36 Hole |
| Motor Type | Direct Drive |
| Flange Spoke Diameter (mm) | 232 |
| Magnetic Pole Pairs (Phaserunner) | 23 |
| Speedo Poles (for CA) | 23 |
| Hysteresis Losses (N-m) | 0.77 |
| Eddie Losses (N-m / rad/sec) | 0.0185 |
| Motor Inductance (H) | 0.0002 |