Canadian
MTC3080R26
Crystalyte The Crown motor, Standard Wind in 26" Downhill Rim, 30mm Magnets and Stator, with Hall Sensors and Thermistor
SKU
M-MTC3080R26
Crystalyte The Crown motor, standard wind in 26 inch Downhill rim
The Crown motor is the latest heavy duty motor from Crystalyte. Weighing around 20 pounds with 135mm dropouts, it is intended for off-road and high power applications. At these power levels torque arms are essential, and if you aren't making your own custom arms we recommend installing dual Rev4 Rear torque arms from our site. Laced in a 26 inch 31mm wide Double Walled Downhill Rim. Paired spoke holes. Flange design accommodates J-bend type spokes.
| Country of Manufacture | China |
|---|---|
| Actual Weight (kg) | 9.2 |
| Motor Nominal Wheel Size | 24" (ISO 507) |
| Motor Power Range (Watts) | 1000-2000 |
| Motor KV (RPM / V) | 9.9 |
| Phase Resistance (Ohm) | 0.12 |
| Disk Brake Compatible | Yes |
| Axle Length (O.L.D.) | 135 |
| Rim Brake Compatible | No |
| Rim Width (mm) | 37.5 |
| Spoke Holes | 36 Hole |
| Motor Type | Direct Drive |
| Flange Spoke Diameter (mm) | 230 |
| Magnetic Pole Pairs (Phaserunner) | 23 |
| Speedo Poles (for CA) | 23 |
| Hysteresis Losses (N-m) | 1.1 |
| Eddie Losses (N-m / rad/sec) | 0.018 |
| Motor Inductance (H) | 0.0002 |
