Canadian
MTC40100R26
Crystalyte The Crown motor, Fast Wind in 26" Downhill Rim, 40mm Magnets and Stator, with Hall Sensors and Thermistor
SKU
M-MTC40100R26
Crystalyte The Crown motor, Fast Wind in 26 inch Downhill rim,
The Crown motor is the latest heavy duty motor from Crystalyte. Weighing around 24 pounds with 150mm dropouts, it is intended for off-road and high power applications. At these power levels torque arms are essential, and if you aren't making your own custom arms we recommend installing dual Rev4 Rear torque arms from our site. Laced in a 26 inch 31mm wide Double Walled Downhill Rim. Paired spoke holes. Flange design accommodates J-bend type spokes.
| Country of Manufacture | China |
|---|---|
| Actual Weight (kg) | 11.1 |
| Motor Nominal Wheel Size | 26" (ISO 559) |
| Motor Power Range (Watts) | 1000-2000 |
| Motor KV (RPM / V) | 11.2 |
| Phase Resistance (Ohm) | .072 |
| Disk Brake Compatible | Yes |
| Axle Length (O.L.D.) | 140 |
| Rim Brake Compatible | No |
| Rim Width (mm) | 37.5 |
| Spoke Holes | 36 Hole |
| Motor Type | Direct Drive |
| Flange Spoke Diameter (mm) | 230 |
| Magnetic Pole Pairs (Phaserunner) | 23 |
| Speedo Poles (for CA) | 23 |
| Hysteresis Losses (N-m) | 0.76 |
| Eddie Losses (N-m / rad/sec) | 0.028 |
| Motor Inductance (H) | 0.0003 |