Language
International
  • Compare ()
  • Create an Account
  • Sign In
Toggle Nav
Search
Advanced Search

9C FH212 SuperH Kit

FH212 Superharness Conversion Kit with Colour Display, Lithium Battery, Baserunner or Phaserunner Controller, and PAS/Torque Sensor Options.

Full Product Information Page

From USD$650.00

To USD$3,205.50 Regular Price USD$3,380.50

In stock

SKU
KIT-FH212_SH
Add to Wish List Add to Compare
Customize 9C FH212 SuperH Kit

The motor is available in 2 different winding speeds depending on how fast you need to go for a given wheel diameter and battery voltage. In most scenarios, we recommend the fast wind for 20" wheels and the standard winding speed for 26" and larger.
The 212 motors have large M14 axles which is better than M12 axles for resisting spinout, but given the motor power we still encourage the use of a suitable torque arm. 
Statorade is recommended if you anticipate using the motor on lots of hills or in cargo applications.

Nine Continent Front Hub Motor, FH212 Model with Proper Bike Alignment, Statorade Ready, and L10 Connector. Standard 8.5 RPM/V Winding

Click Here for detailed product info page

Nine Continent Front Hub Motor, FH212 Model with Proper Bike Alignment, Statorade Ready, and L10 Connector. Standard 8.5 RPM/V Winding

Click Here for detailed product info page

V5 Torque Arm with Hardened Insert for Fender Eyelet Mounting. Tidy Front and Rear Installations with 12mm, 14mm and now 16mm Axles.  Also Available on Amazon for US customers

Click Here for detailed product info page

V5 Torque Arm with Hardened Insert for Fender Eyelet Mounting. Tidy Front and Rear Installations with 12mm, 14mm and now 16mm Axles.  Also Available on Amazon for US customers

Click Here for detailed product info page

L10 Extension Cable (60cm)

60cm Motor Phase Extension Cable with Male and Female L1019 Plug

Click Here for detailed product info page

60cm Motor Phase Extension Cable with Male and Female L1019 Plug

Click Here for detailed product info page

You can get a bare hub and lace it into a suitable 36 hole rim yourself, or choose to get a professional wheel build done here at Grin using our stock rim selections and quality Sapim butted spokes.  Our head wheel builder Robert has decades of experience and is renowned for building wheels that are nearly bombproof. 

If you want Grin to do the wheelbuild, be sure to select either the Silver or Black spoke option from the dropdown menu, along with your preferred rim. By default all wheels will be be dished with the rim dead center between the dropouts, if you require some special dishing offset for an oddball frame please mention that in the order comments. If you are doing your own wheel build into your own rim and just require the spokes only, be sure to specify the required spoke length in the order comments to match your selected rim ERD and lacing pattern.

The Baserunner controller is ideal if you are getting a downtube battery as we will mount it inside the battery cradle.  The larger Phaserunner is required if you need an option that can run up to 72V, or if you are using one of the other battery models. It will also produce slightly higher peak torque due to the 90A vs 80A max phase current. 

New Model V6 Baserunner_L10 Field Oriented Motor Controller. Flat Profile Fits Many Downtube Battery Enclosures. L1019 Motor Plug. 80A Peak Phase Currents (~45-50A Continuous), for 24-52V Batteries (60V Max Input).   

Click Here for detailed product info page

New Model V6 Baserunner_L10 Field Oriented Motor Controller. Flat Profile Fits Many Downtube Battery Enclosures. L1019 Motor Plug. 80A Peak Phase Currents (~45-50A Continuous), for 24-52V Batteries (60V Max Input).   

Click Here for detailed product info page

Aluminum Controller Mount for Reention Poly-DPxC Series Downtube Batteries, Machined to fit Baserunner Motor Controllers

Click Here for detailed product info page

Aluminum Controller Mount for Reention Poly-DPxC Series Downtube Batteries, Machined to fit Baserunner Motor Controllers

Click Here for detailed product info page

Several display options are available to show basic information like bicycle speed, motor power, trip distance etc. through communication with the motor controller. The displays also provide the on/off power switch for the system and have up/down buttons to cycle through between 3 to 9 levels of pedal-assistance.

Colour Display with Integrated Up/Down and Power Buttons for Grin Super-H Kits.  Mounts Beside Hand Grip. Customized Version of 600C for Grin Tech, Works up to 72V and Shows Regen Current. 

Click Here for detailed product info page

Colour Display with Integrated Up/Down and Power Buttons for Grin Super-H Kits.  Mounts Beside Hand Grip. Customized Version of 600C for Grin Tech, Works up to 72V and Shows Regen Current. 

Click Here for detailed product info page

Main9 Superharness

Advanced Harness for Connecting Standard Displays,  Throttles and Ebrakes to V6 Phaserunner / Baserunner Controllers. Supports Multiple Modes of Regen Braking, and Front and Rear Light Control. 

Click Here for detailed product info page

Advanced Harness for Connecting Standard Displays,  Throttles and Ebrakes to V6 Phaserunner / Baserunner Controllers. Supports Multiple Modes of Regen Braking, and Front and Rear Light Control. 

Click Here for detailed product info page

Throttles, ebrake levers, pas sensors, and torque sensors all play a roll in how you interact with the ebike. The Torque or PAS sensor plugs in directly to the motor controller and provide assistance based on the assist level of the display, while throttle and ebrakes hook up to the Main9 Superharness.  If you are confused about the PAS and Torque sensor options, please see our pedal sensor info page.  Regenerative braking can be controlled either with a digital brake sensor and modulated with the throttle, with an analog brake sensor that produces a varying signal directly, or without a brake sensor using one of the bidirectional throttles instead. 

Universal Lever Thumb Throttle with Clamp On Handlebar Mount and 3 pin HiGo style connector

Click Here for detailed product info page

Universal Lever Thumb Throttle with Clamp On Handlebar Mount and 3 pin HiGo style connector

Click Here for detailed product info page

The kit will run with any battery pack from 24V to 52V nominal (and up to 72V with a Phaserunner).
We offer a range of batteries that will work well depending on the geometry of your bike, the range you need on a charge, and how fast you want to go.  Please see our battery info page for more details on the different pack options.  
Be sure to select a charger model that matches the voltage (36V, 48V, or 52V) and connector style (ST3 or XLR) of the chosen pack.  

There are a number of optional electronic and mechanical accessories that can help flush out the build. This includes front and rear bike lights, phone chargers, wire management, programming cables, and what have you. 

Handlebar Phone Mount with both Wireless and USB Charging, Wide 12-95V Input Range.  

Click Here for detailed product info page

Bike tracker that works with Apple Find My  

Click Here for detailed product info page

Wide Voltage Range (6-60V), 3 watt Ebikes Light, Fork Fender mounting. 50cm cable, 5.5x2.1mm DC Jack. On/off Switch, Powers off Cycle Analyst/Anderson Tap. StVZO Compliant.

Click Here for detailed product info page

Grin 12 LED Front E-Light, 72V Ready

Click Here for detailed product info page

Super Bright (Max 1900 Lumen) Ebike Light with Handlebar Button and Hi/Low Beam Modes and Daytime Run Lights as Well. 12-60V Input Range with Reflective Cutoff Optics. Plugs Directly to Cycle Analyst.

Click Here for detailed product info page

Main9 to DC 5.5mm x 2.1mm Male Adapter, 1m long. Provides Convenient Power Source for Rear Bike Lights from Unused Main9 Plug in Controllers with V3 Cycle Analyst  

Click Here for detailed product info page

180cm DC Accessory Extension Cable

Click Here for detailed product info page

Rear Ebike Light, No On/Off Push Button, 6-60V Input Range with DC 5.5x2.1mm DC Jack. 

Click Here for detailed product info page

Parallel Anderson Cable for Baserunners Installed in Reention Case. Simplifies Dual Controllers or Dual Battery Systems.  Must be purchased with Baserunner and Reention battery

Click Here for detailed product info page

4 Pieces of Snap Together Black Plastic Cable Raceway, 15 and 20mm Wide, 50cm long. Self Adhesive Tap Bonds to Bicycle Tube, Perfect for Hiding Cable Runs. 

Click Here for detailed product info page

Cable Bundling Kit, includes Spiral Wrap, Zip Ties, and Velcro Sleeves

Click Here for detailed product info page

Laser Engrave 250 Watt Continuous Power Rating on Motor Side Plate.  This is Truthfull. ALL Hub Motors Offered by Grin Have an Operating Point (RPM and Allowable Temperature) Where They Can Only Sustain 250W. 

Click Here for detailed product info page

3m Long TTL-> USB programming cable for Satiator, Baserunner, Phaserunner and Cycle Analyst. *Note: All kits come pre-programmed, and most system behaviour is configurable with the Cycle Analyst buttons. But this cable is necessary if you plan to change more advanced controller settings or update device firmware* Full Product Info

Click Here for detailed product info page

Schwalbe Big Apple 26" x 2.15 Puncture Resistant Tire. 

Click Here for detailed product info page

* Required Fields

Your Customization
Ready to Roll Kit with FH212 Direct Drive Front Hub Motor (ignore fact that rear motor shown in pic)
9C FH212 SuperH Kit

In stock

USD$717.00

Unable to add to cart because these items are out of stock:

Actual cruising speed/perfomance under any loading conditions is well modeled in our simulator.
Launch Motor Simulator with 9C FH212 SuperH Kit

Summary
  • Motor Winding Option:
    1 x FH212_Std
  • M14 Front Torque Arms:
    1 x V5 Universal Eyelet Torque Arm
  • Front Motor Extension Cable:
    1 x L10 Extension Cable (60cm)
  • L10 Controller:
    1 x V6 Baserunner_L10 ETA: Apr 1 2025 (backordered)
  • Baserunner Controller Mount:
    1 x Reention battery baseplate, machined to fit Baserunner
  • Display Model:
    1 x 600C Integrated Handlebar Display and Switch
  • Display Harness:
    1 x Main9 Superharness
  • Throttle Style (Higo):
    1 x Thumb Throttle with Clamp (40cm Cable, Higo Plug)

Front FH212 Superharness based conversion Kit with your choice of UART display, battery pack, and PAS/Torque sensor options. The basic display kits have a modern looking screen but are not as customizable as our Cycle Analyst systems. Please see our Kit Styles page for more details.  

  • Direct Drive motor, robust and reliable with no moving parts.
  • 0.35mm stator laminations for lower rolling drag.
  • Fully statorade compatible with injection port in disk hole.
  • Uses overmolded L1019 connector with side axle cable exit.
  • Available in two winding speeds (Fast and Standard).

For a full explanation of the various drop-down choices and a comparison of this package versus other motor options, see our Grin Kits Info Page