Canadian
MSTOKE_CL
Stoke Monkey Motor, Clyte SAW405, 8.6 RPM/V
SKU
SMP-MSTOKE_CL
Crystalyte SAW405 Stoke Monkey Motor, 8.6 RPM/V
This is a new Stokemonkey Motor from Crysalyte based on their SAW motor series, and it uses the same axle design with internal M6 bolt threads as the original 400 series Stokemonkey motors. If doing a custom bracket, it is essential to make it from steel between 5-6mm thick, and to provide a tight fitting and deep 10mm axle slot. The wire side of the axle has a groove that results in minimal contact surface with the inside of the bracket, and so most of the spinout retention comes from the freewheel side axle only.
For more information please see the Stokemonkey page
| Country of Manufacture | China |
|---|---|
| Actual Weight (kg) | 5.0400 |
| Motor Power Range (Watts) | 500-1000 |
| Motor KV (RPM / V) | 8.7 |
| Phase Resistance (Ohm) | 0.29 |
| Thermistor Style | 10K NTC, B~3900 |
| Axle Length (O.L.D.) | 120 |
| Spoke Holes | 36 Hole |
| Motor Type | Direct Drive |
| Magnetic Pole Pairs (Phaserunner) | 20 |
| Speedo Poles (for CA) | 20 |
| Hysteresis Losses (N-m) | 0.49 |
| Eddie Losses (N-m / rad/sec) | 0.01 |
| Motor Inductance (H) | 0.00085 |
We found other products you might like!
