Bafang G311 Standard Wind

Bafang G311 Standard Wind (8.4 rpm/V) Front Geared Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug with Combined Speed + Thermistor Signal. Meant for 24", 26" and 700c Wheels.

From USD$210.00

To USD$480.60

In stock

SKU
Bundle-MG311_Std
Customize Bafang G311 Standard Wind
MG311 Standard Wind, Unlaced

Bafang G311 Standard Wind (8.4 rpm/V) Front Geared Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug with Combined Speed + Thermistor Signal. Meant for 24", 26" and 700c Wheels.

Bafang G311 Standard Wind (8.4 rpm/V) Front Geared Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug with Combined Speed + Thermistor Signal. Meant for 24", 26" and 700c Wheels.

GRIN Front Torque Arm for G311 Motors. Replaces Disk Side Anti-Rotation Washer. Requires Fork with Fender Eyelets. Full Product Information Page

Click Here for detailed product info page

GRIN Front Torque Arm for G311 Motors. Replaces Disk Side Anti-Rotation Washer. Requires Fork with Fender Eyelets. Full Product Information Page

Click Here for detailed product info page

Laser Engrave 250 Watt Continuous Power Rating on Motor Side Plate.  This is Truthfull. ALL Hub Motors Offered by Grin Have an Operating Point (RPM and Allowable Temperature) Where They Can Only Sustain 250W. 

Click Here for detailed product info page

* Required Fields

Your Customization
Ready to Roll Kit with G311 Front Motor, Downtube Battery, Baserunner Controller, PAS/Torque sensors etc.
Bafang G311 Standard Wind

In stock

USD$230.00

Unable to add to cart because these items are out of stock:

Summary
  • G311_Std:
    1 x MG311 Standard Wind, Unlaced
    SKU#: M-MG311_Std
  • G311 Torque Arm:
    1 x G311 Torque Arm
    SKU#: TA-TorqArm_311

The Bafang G311 motor is a compact disk compatible 2.3kg front hub with a nominal 250-350 watt power rating that works great for stealthy systems that do not require significant assist for steep hills or cargo. This motor includes an internal 6-pole speedometer sensor so it can use a CA device and not require an external speedo pickup. It has a spiral gears on the initial reduction of a double stage planetary gear and is exceptionally quiet for a geared motor. This hub is wound with a standard 8.4 rpm/V winding, well suited for 26" and 29" wheels, but can be used in slow and high torque 20" and 16" setups as well. Uses 9-pin overmolded Higo Z910 waterproof connector for the motor phase, hall, and combined speedo and thermistor wires. Has internal tabbed washers for anti-torque rotation with the dropouts and a round 10mm axle. Does not work with conventional torque arms.

For more details, see the G31X Geared Motor Info Page