Blog

This is a proud moment for all of us at Grin. After three years of development and 6 months of beta field testing we’re now launching the Cycle Satiator in full capacity. For anyone who’s been fed up with the overall shoddiness of battery chargers available for electric bikes, this should get you salivating.

Please click the link above for more information, and also check out the endless-sphere discussion thread for the most immediate updates on firmware and software enhancements and our development vision.

We managed to bring the Satiator into production without any kickstarter campaign or venture financing. Instead, this whole project was made possible by all the loyal customers and enthusiasts who caught the ebike bug and have been patronizing our shop over the years. Your business and your encouraging feedback has kept us motivated to keep developing new ebike technology, and well that's what we've been doing.

Time to Pay You Back

As a thank you, we’re giving a 20% ($60) discount on the Satiator from now until Boxing Day to anyone who has purchased either 2 or more Cycle Analyst devices from us, or has spent over $2000 in other parts from our shop. If you fit in this camp and like what you see, then simply email us with your order history and make sure you have an account setup on our current website, and we will hook you up.  Your faith in our business always has been and will be much appreciated. 

We all but gave up on Nine Continent hub motors in recent times for a lot of reasons (inadequate disc clearance, poor paint job, inconsistent wheel lacing, improper connector crimping etc.). But things change, and we were truly blown away when we got samples of their latest 2014 model of rear motor this summer. It was one of several motors we’ve been evaluating that finally uses splined cassette freehubs rather than screw-on freewheels for the rear cog set.

• Shimano Compatible Cassette Freehub
• 30mm Wide Stator Core (vs 27mm in older model)
• 20mm Clearance for Disk Calipers
• Side Axle Wire Exit
• 10K Thermistor for Temperature Sensing
• Paired spoke holes
• Diecast aluminum stator core
• Future tech styling

We’ve now got a large supply of these available in a very fast (3004), fast (3006), and medium speed (3007) winding, both as bare motors or in a complete kit form.

The performances are fully modeled on the motor simulator (as NineCont 300X), on our spoke calculator, and we’ve produced a mechanical diagram of all the key dimensions from our 3D CAD model. That should be sufficient data to have you sold!

Motor Dimensional Diagram	Bare Hubs for Sale	Complete Conversion Kits

We also made the decision to stock them all unlaced, given you the option of low cost international shipping, or having a quality hand-built wheel custom laced into the rim of your choice with butted Sapim spokes. As part of this process, we’ve increased the range and type of rims we carry, adding a new PR17 series in 20”, 24”, 26”, and 700c. All these goods are in stock and ready to ship for your winter build projects. 

There’s a new tab on our website that makes it easier to find our Grin distributed products from a local supplier.  Click on the “Dealers” button above to see our list of businesses around the world who have been great partners in getting electric bike gear into your hands.

We’ve tried to make it easy to filter by general product categories and geographic region so you can see if there is a business in your area that carries the parts you are after. If so, buying local can save on shipping, provide nearby service and support, and connect you to your local ebike community. So have a look today and see if there are dealers in your neighborhood to connect with.

These business partners all play crucial roles in the growth and development of the electric bicycle movement, and we’d like to publicly thank them for the many years of sticking together through good times and bad. It’s been a ride and collectively dealers now account for over 60% of our supplied goods.

On that note, if you know of a bike shop or ebike business with similar vision that you think should carry GRIN gear like the wonderful folks above, don't hesitate to make a suggestion to get in touch. Check out the summary pamphlet here which outlines our role in the ebike world.

Last month we received what was one of our largest sea shipments of Crystalyte motors to date, large because there were so many new motor models and enhancements to get us excited. Here is the short summary:

Crown motors with Normal Spoke Flange

Previously, the large Crown motors had a pseudo straight-pull spoke design which meant custom wheel builds or even run of the mill spoke replacement was a great inconvenience. Well no more, they’ve now been retooled with a regular flange taking standard spokes, giving freedom to custom lace at will.

Narrower Crown motors

As well, we’ve received a narrower version of the Crown motor with a 30mm wide stator, which allows it to fit in a 135mm bike dropout with a 7-8 speed freewheel (Normal Crown motors are really for 1 or 3 speed freewheels). Although that also means less power and torque than the 40mm Crown hubs, it makes for a much more rideable bike conversion.

NSM and narrow SAW motors for folding bikes

We’re also introducing two new motor series designed for the special requirements of folding bikes with 75mm fork dropouts and small diameter wheels.  The Crystalyte NSM motor is the smallest direct drive hub we have seen, and is ideal for Brompton and Tikit conversions with 200-300 watt assist levels. The 20mm SAW motor is larger in diameter for better torque, power, and efficiency, at the expense of a bit more weight. Both come with 75mm axles that are machined with 8mm axle flats for a drop-in fit on Brompton forks.  

The SAW motor we also have stocked in a larger 20” wheel suitable for the range of Dahon folders. We will be building more dedicated kit packages around these smaller wheels for easy installation with Brompton, Bike Friday Tikit, and Dahon bikes, but for now have the motors themselves available for those doing a DIY build.

Unlaced with Options

Finally we’ve increased the availability of motors stocked unlaced, including front and rear H series motors and the Crown hubs as well. This simplifies those doing custom wheel builds for fat tire bikes or rim matching, and reduces shipping cost significantly for overseas orders.  

For all of these new hubs, we’ve created full 3-D CAD models and also characterized their performance behavior and put them on the motor simulator page accordingly.

NSM CAD	SAW20 CAD	TC30 CAD	TC40 CAD

Battery Bags

We’ve also got a good stock of the Crystalyte rear trunk bag as a battery enclosure option for the Naked Allcell battery packs. This as a built-in wiring harness with an on/off switch, so that you don’t need to rely on unplugging and plugging connectors, and has sufficient ground and side padding to keep the heat-shrunk packs protected.  

At the start of August, Justin and Anne-Sophie packed up a pair of electric Brompton bikes, some competition unicycles, and a small stash of clothes for what was nearly a 7 week world tour. This included joining the 17^th international unicycle convention in Montreal, touring through France, Germany, and Switzerland to meet many of our European dealers face to face, attending the Eurobike show in Friedrichshaven, the Interbike show in Vegas, and finally spending a good week in the UK with some of our English comrades in crime. 

So we’d like to publicly thank all those who made this such a great adventure. From Martin and Bobby for taming the beast at Unicon, to Philippe, Jean-Pascal, Andreas, Florian, and Reinhard for the accommodation through Europe. To Guillaume, Jules, and Tristan for such good company at Eurobike, and Stefan + the Radkutsche crew for the t-shirts and making our day. Miles you were a kind host with mind-blowing knowledge, and Steve it’s great to meet early pioneers. And finally to Ron, Tora, Paul, Ching, Wake, and everyone else at Interbike. We’ll hopefully see you next year.

A lot of other progress has been taking place at Grin in the past 2 months too, and if you’ve browsed around our store site lately you may have some clues to what is coming. So stay tuned as we’ll be filling this blog site with a number of announcements in the coming weeks.. 

Our Ebike Trip Analysis Software is now posted live on our main website in the online tools section. We've included a number of new features since the last announcement, including the ability to label different segments of your trip then upload the results so you can share a link to the graphs and energy usage data.  Take part in the full discussion here.

We're really happy to see where this is going. If you’ve been logging Cycle Analyst data from your ebike/EV trips and have interesting observations to share, then please let us know and send a link of the results. 

A number of people with modern bikes have been hesitant to add a torque sensing bottom bracket to their ebikes because it meant changing over their cranksets to a square taper model as well.

Well, at least there is one choice for a splined interface. The company NCTE has produced a torque sensor that has the same electrical specifications as the THUN devices, but which uses an ISIS spindle. We've got a 128mm spindle length model in stock for those with ISIS cranks keen to try it out. 

Needless to say we had a pretty fun booth display and demo ebike fleet at the Vancouver Maker Faire last month. Thanks to all who came out to pay a visit and support the creative DIY and maker scene in town.

This coming weekend is the annual VEVA Electrafest Show, featuring nothing but local electric vehicles, from little DIY e-scooters up to full sized commercial electric cars. We're not going to have a full booth presence, but Justin will certainly be there with the latest version of our weight sensing inline-motor electric longboard, and perhaps some other projects up his sleeve.

If you are in the Vancouverarea and have an ebike or EV project you want to show off, it's free and not too late to register for the show and include your vehicle in the mix! The event is at the Concord Pacific, just by science world, and conveniently not too far from our shop either. 

We’ve finished a significant round of enhancements to our online ebike spoke calculator application to better serve the needs of people lacing hub motor wheels.

• Dimensionally accurate real time drawing of the motor, rim, and selected lacing pattern, so you have confidence to see that the hub/rim choices are correct
• Measurement of the spoke angle at the rim to indicate possible stresses at the nipple and threads.
• Allowance of paired spoke holes. Many large diameter hub motors have spoke holes grouped in two rather than uniformly distributed, but there are few tools out there to help calculate the appropriate length.

Check it out. We've added a number of new motor sizes (like the Magic Pie3, Crysatlyte Crown, Heinzmann PRA etc.), and are open to add additional suggestions via the related endless-sphere thread.