Language
International
  • Compare ()
  • Create an Account
  • Sign In
Toggle Nav
Search
Advanced Search

G311 Front SuperH Kit

The Front Geared Bafang G311 Super-H Conversion Kit with your choice of UART display, lithium Battery, V6 Baserunner Z9 Controller, and PAS/Torque Sensor Options.

-30% OFF Promo- Use Coupon Code "G3FORME" at checkout

Full Product Information Page

From USD$560.00

To USD$2,552.10 Regular Price USD$2,667.10

In stock

SKU
KIT-G311_SH
Add to Wish List Add to Compare
Customize G311 Front SuperH Kit

The G311 motors are available in 2 different winding speeds (fast and standard) depending on how fast you need to go for a given wheel diameter and battery voltage. In most scenarios, we recommend the fast wind for 20" wheels and the standard winding speed for 26" and larger.

These motors have round axles (3/8" x 26 tpi) with internal tabbed washers to resist axle spinout. For most fork dropouts this is sufficient, but we also make a custom torque arm that replaces the inside washer on the right side and secures against the fork fender eyelet for added security. 

Bafang G311 Standard Wind (8.4 rpm/V) Front Geared Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug with Combined Speed + Thermistor Signal. Meant for 24", 26" and 700c Wheels.

Bafang G311 Standard Wind (8.4 rpm/V) Front Geared Hub Motor with 9-pin Waterproof Higo Z910 Motor Plug with Combined Speed + Thermistor Signal. Meant for 24", 26" and 700c Wheels.

GRIN Front Torque Arm for G311 Motors. Replaces Disk Side Anti-Rotation Washer. Requires Fork with Fender Eyelets. Full Product Information Page

Click Here for detailed product info page

GRIN Front Torque Arm for G311 Motors. Replaces Disk Side Anti-Rotation Washer. Requires Fork with Fender Eyelets. Full Product Information Page

Click Here for detailed product info page

Z910 Extension Cable (60cm)

60 cm Motor Phase Extension Cable with Waterproof Z910 Plugs. For Baserunner Installations with Front Hub Motors

Click Here for detailed product info page

60 cm Motor Phase Extension Cable with Waterproof Z910 Plugs. For Baserunner Installations with Front Hub Motors

Click Here for detailed product info page

You can get a bare hub and lace it into a suitable 36 hole rim yourself, or choose to get a professional wheel build done here at Grin using our stock rim selections and quality Sapim butted spokes.  Our head wheel builder Robert has decades of experience and is renowned for building wheels that are nearly bombproof. 

If you want Grin to do the wheelbuild, be sure to select either the Silver or Black spoke option from the dropdown menu, along with your preferred rim. By default all wheels will be be dished with the rim dead center between the dropouts, if you require some special dishing offset for an oddball frame please mention that in the order comments. If you are doing your own wheel build into your own rim and just require the spokes only, be sure to specify the required spoke length in the order comments to match your selected rim ERD and lacing pattern.

The Baserunner Z9 controller supports up to 55A peak phase currents and will be mounted neatly inside the cradle of our downtube batteries. If it is purchased with a flatpack or bottle battery we will terminate the short power leads with anderson powerpole connectors, and would recommend getting one of the optional mounting brackets.

The V3 Cycle Analyst and control switch is an integral part of this kit package. 

V6 Baserunner_Z9

V6 Baserunner_Z9 Field Oriented Motor Controller, Compatible with New Superharness Kit System. Flat Profile Fits Many Downtube Battery Enclosures. Z910 Motor Plug. 55A Peak Phase Currents (~30A Continuous), for 24-52V Batteries (60V Max Input).  Full Product Information Page

Click Here for detailed product info page

V6 Baserunner_Z9 Field Oriented Motor Controller, Compatible with New Superharness Kit System. Flat Profile Fits Many Downtube Battery Enclosures. Z910 Motor Plug. 55A Peak Phase Currents (~30A Continuous), for 24-52V Batteries (60V Max Input).  Full Product Information Page

Click Here for detailed product info page

Aluminum Controller Mount for Reention Poly-DPxC Series Downtube Batteries, Machined to fit Baserunner Motor Controllers

Click Here for detailed product info page

Aluminum Controller Mount for Reention Poly-DPxC Series Downtube Batteries, Machined to fit Baserunner Motor Controllers

Click Here for detailed product info page

Several display options are available to show basic information like bicycle speed, motor power, trip distance etc. through communication with the motor controller. The displays also provide the on/off power switch for the system and have up/down buttons to cycle through between 3 to 9 levels of pedal-assistance.

Colour Display with Integrated Up/Down and Power Buttons for Grin Super-H Kits.  Mounts Beside Hand Grip. Customized Version of 600C for Grin Tech, Works up to 72V and Shows Regen Current. 

Click Here for detailed product info page

Colour Display with Integrated Up/Down and Power Buttons for Grin Super-H Kits.  Mounts Beside Hand Grip. Customized Version of 600C for Grin Tech, Works up to 72V and Shows Regen Current. 

Click Here for detailed product info page

Main9 Superharness

Advanced Harness for Connecting Standard Displays,  Throttles and Ebrakes to V6 Phaserunner / Baserunner Controllers. Supports Multiple Modes of Regen Braking, and Front and Rear Light Control. 

Click Here for detailed product info page

Advanced Harness for Connecting Standard Displays,  Throttles and Ebrakes to V6 Phaserunner / Baserunner Controllers. Supports Multiple Modes of Regen Braking, and Front and Rear Light Control. 

Click Here for detailed product info page

Throttles, ebrake levers, pas sensors, and torque sensors all play a roll in how you interact with the ebike. The Torque or PAS sensor plugs in directly to the motor controller and provide assistance based on the assist level of the display, while throttle and ebrakes hook up to the Main9 Superharness. If you are confused about the PAS and Torque sensor options, please see our pedal sensor info page.  Even if you choose a PAS or Torque sensor as the primary control, we always recommend having a throttle as well. It can be handy to accelerate in tight situations and is great as a back-up if ever the pedal sensor has issues.

Universal Lever Thumb Throttle with Clamp On Handlebar Mount and 3 pin HiGo style connector

Click Here for detailed product info page

Universal Lever Thumb Throttle with Clamp On Handlebar Mount and 3 pin HiGo style connector

Click Here for detailed product info page

The kit will run with any battery pack from 24V to 52V nominal (and up to 72V with a Phaserunner).
We offer a range of batteries that will work well depending on the geometry of your bike, the range you need on a charge, and how fast you want to go.  Please see our battery info page for more details on the different pack options.   

Be sure to select a charger model that matches the voltage (36V, 48V, or 52V) and connector style (ST3 or XLR) of the chosen pack.  

If you are looking to get the kit with a pilot batch of our Air Travel friendly LiGo 10X batteries instead, don't select any battery here. Instead use the LiGo 10X battery store page to separately add the pack to your cart.

There are a number of optional electronic and mechanical accessories that can help flush out the build. This includes front and rear bike lights, phone chargers, wire management, programming cables, and what have you. 

Handlebar Phone Mount with both Wireless and USB Charging, Wide 12-95V Input Range.  

Click Here for detailed product info page

Bike tracker that works with Apple Find My  

Click Here for detailed product info page

Wide Voltage Range (6-60V), 3 watt Ebikes Light, Fork Fender mounting. 50cm cable, 5.5x2.1mm DC Jack. On/off Switch, Powers off Cycle Analyst or Superharness. StVZO Compliant.

Click Here for detailed product info page

Super Bright (Max 1900 Lumen) Ebike Light with Handlebar Button and Hi/Low Beam Modes and Daytime Run Lights as Well. 12-60V Input Range with Reflective Cutoff Optics. Plugs Directly to Cycle Analyst.

Click Here for detailed product info page

Main9 to DC 5.5mm x 2.1mm Male Adapter, 1m long. Provides Convenient Power Source for Rear Bike Lights from Unused Main9 Plug in Controllers with V3 Cycle Analyst  

Click Here for detailed product info page

180cm DC Accessory Extension Cable

Click Here for detailed product info page

Rear Ebike Light, No On/Off Push Button, 6-60V Input Range with DC 5.5x2.1mm DC Jack. 

Click Here for detailed product info page

Parallel Anderson Cable for Baserunners Installed in Reention Case. Simplifies Dual Controllers or Dual Battery Systems.  Must be purchased with Baserunner and Reention battery

Click Here for detailed product info page

4 Pieces of Snap Together Black Plastic Cable Raceway, 15 and 20mm Wide, 50cm long. Self Adhesive Tap Bonds to Bicycle Tube, Perfect for Hiding Cable Runs. 

Click Here for detailed product info page

Cable Bundling Kit, includes Spiral Wrap, Zip Ties, and Velcro Sleeves

Click Here for detailed product info page

Laser Engrave 250 Watt Continuous Power Rating on Motor Side Plate.  This is Truthfull. ALL Hub Motors Offered by Grin Have an Operating Point (RPM and Allowable Temperature) Where They Can Only Sustain 250W. 

Click Here for detailed product info page

3m Long TTL-> USB programming cable for Satiator, Baserunner, Phaserunner and Cycle Analyst. *Note: All kits come pre-programmed, and most system behaviour is configurable with the Cycle Analyst buttons. But this cable is necessary if you plan to change more advanced controller settings or update device firmware* Full Product Info

Click Here for detailed product info page

Schwalbe Big Apple 26" x 2.15 Puncture Resistant Tire. 

Click Here for detailed product info page

* Required Fields

Your Customization
Ready to Roll Kit with G311 Front Motor, Downtube Battery, Baserunner Controller, PAS/Torque sensors etc.
G311 Front SuperH Kit

In stock

USD$625.00

Unable to add to cart because these items are out of stock:

Actual cruising speed/perfomance under any loading conditions is well modeled in our simulator.
Launch Motor Simulator with G311 Front SuperH Kit

Summary
  • Motor Winding Option:
    1 x MG311 Standard Wind, Unlaced
    SKU#: M-MG311_Std
  • G311 Torque Arm:
    1 x G311 Torque Arm
    SKU#: TA-TorqArm_311
  • Extension Cable from Baserunner to Motor:
    1 x Z910 Extension Cable (60cm)
    SKU#: W-Z910_Ext_60
  • V6 Baserunner:
    1 x V6 Baserunner_Z9
    SKU#: C-BRZV6
  • Baserunner Controller Mount:
    1 x Reention battery baseplate, machined to fit Baserunner
    SKU#: CP-BPReen
  • Display Model:
    1 x 600C Integrated Handlebar Display and Switch
    SKU#: DSP-600C
  • Display Harness:
    1 x Main9 Superharness
    SKU#: W-M9SHarness
  • Throttle Style (Higo):
    1 x Thumb Throttle with Clamp (40cm Cable, Higo Plug)
    SKU#: T-CLever_HG3

The Rear Geared G310 Super-H Conversion kit with your choice of UART display, battery pack, and PAS/Torque sensor options. The basic display kits have a modern looking screen but are not as customizable as our Cycle Analyst systems. Please see our Kit Styles page for more details.  

  • V6 Baserunner Z9 motor controller
  • Downtube lithium battery
  • UART display and pedal assist systems.

This setup includes everything configured out of the box for the ideal for a minimal, lightweight commuter ebike with pedalec control.

For a full explanation of the various drop-down choices and a comparison of this package versus other motor options, see our Grin Kits Info Page

For details on the G311 hub in particular, see the G31X Geared Motor Info Page

For details on the PAS/Torque sensor selection, see the Advanced PAS Kit Info Page