Crystalyte H3525 (7.1 rpm/V) UFO Rear Motor with 142 x 12 Thru Axle StandardNote: New torque arm design
Click Here for detailed product info page
- Out of Stock -
Crystalyte H3540 (9.5 rpm/V) UFO Rear Motor with 142 x 12 Thru Axle StandardNote: New torque arm design
Click Here for detailed product info page
Crystalyte H4040 UFO Rear Motor with 148 x 12 Boost Size Thru Axle Standard Note: New torque arm design
Click Here for detailed product info page
Labour for Hand Lacing Hub Motor Into Rim
Click Here for detailed product info page
Custom Cut Silver Pillar Spoke, Butted 13-14 Gauge, Specify Length at Checkout, Includes Nipple
Click Here for detailed product info page
Custom Cut Black Sapim Spokes, Butted 13-14 Gauge, Includes Nipple
Click Here for detailed product info page
16" ( ETRTO349) ZAC19 Weinmann Rim with Eyelets, 25mm Wide
Click Here for detailed product info page
20" ZAC19 Weinmann Rim with Eyelets, 24mm Wide
Click Here for detailed product info page
20" DM30 Weinmann Double Wall Black 30mm Wide, with Eyelets
Click Here for detailed product info page
24" 31mm Wide Downhill Crystalyte Rim, 36 hole
Click Here for detailed product info page
20 Inch, 36 hole, 65mm Wide Weinmann Double Walled Rim, for Fat Bike Tires.
Click Here for detailed product info page
20", 36 hole, 31mm Wide Downhill Crystalyte Rim
Click Here for detailed product info page
26" 31mm Wide Downhill Crysatlyte Rim, 36 hole. Fits disc brakes only, not compatible with rim brakes.
Click Here for detailed product info page
24"(ISO507) Andra 40 Double Walled Rim, 31mm Wide, 36 holes
Click Here for detailed product info page
26 Inch, 36 hole, 65mm Wide Weinmann Double Walled Rim, for Fat Bike Tires
Click Here for detailed product info page
26" ZAC19 Weinmann Rim with Eyelets, 24mm Wide
Click Here for detailed product info page
26" DM24 Alex Rim Black, 32mm Wide with Stainless Steel Spoke Eyelets. Compatible with both disc and rim brakes.
Click Here for detailed product info page
- Out of Stock -
27.5" (650b) (ISO 584) Weinmann XM280 Black Rim, 28mm Wide, Disc Brake Only, 36 hole
Click Here for detailed product info page
- Out of Stock -
26" DM30 Weinmann Double Wall Black/ Silver 30mm Wide Rim
Click Here for detailed product info page
700c (29") ZAC19 Weinmann Rim, 24mm Wide
Click Here for detailed product info page
27.5" (650b) (ISO 584) SE Bikes J36U Black Rim, 41mm Wide, Disk Brakes Only, 36 hole
Click Here for detailed product info page
- Out of Stock -
29" DM30 Weinmann Double Wall Black 30mm Wide Rim
Click Here for detailed product info page
27.5" (650b) DM24 Alex Rim, 36 hole, 32mm Wide with Stainless Steel Spoke Eyelets
Click Here for detailed product info page
- Out of Stock -
Frame Clamp to Lock Crystalyte Thru Axle Torque Arm to Bicycle Stays with Hose Clamps
Click Here for detailed product info page
8 Speed DNP 11-32 Tooth Freewheel
Click Here for detailed product info page
9 Speed 11-32 tooth DNP Freewheel
Click Here for detailed product info page
7 Speed DNP 11-32 Tooth Freewheel
Click Here for detailed product info page
Magura Storm HC 160mm 6-Bolt Rotor
Click Here for detailed product info page
Magura 180mm 6-Bolt Rotor
Click Here for detailed product info page
Magura 203mm 6-Bolt Rotor
Click Here for detailed product info page
36V 14.5 Ah Downtube Battery with Panasonic NCR21700A Cells, 40A BMS
Click Here for detailed product info page
36V 16.5 Ah Downtube Battery with Samsung 35E Cells, Low Profile Reention Casing with on/off Switch
Click Here for detailed product info page
36V 19.3 Ah Downtube Battery with Panasonic NCR21700A Cells, 40A BMS. XLR-ST3 Adapter not included.
Click Here for detailed product info page
36V 26.5 Ah Downtube Battery in Reention DP9 Casing with Panasonic GA Cells, 40A BMS. UN38.3 Certified for Shipping.
Click Here for detailed product info page
48V 16.5 Ah Downtube Battery in Reention Casing with Panasonic GA Cells, 40A BMS. UN38.3 Certified for Shipping.
Click Here for detailed product info page
- Out of Stock -
48V 19 Ah Downtube Battery with Panasonic 21700 A Cells, 40A BMS, ST3 Charge Port.
UN38.3 Certified for Shipping.
Click Here for detailed product info page
52V 14.5 Ah Downtube Battery with Panasonic NCR21700A Cells, 40A BMS
Click Here for detailed product info page
52V 20 Ah Downtube Battery in Reention DP9 Casing with Samsung 35E Cells, 40A BMS. UN38.3 Certified for Shipping.
Click Here for detailed product info page
Triple Bob and Hose Clamps for Secure Mounting of Hailong-01, 21700, and Reention Downtube Batteries
Also Available on Amazon for US customers
Click Here for detailed product info page
2x Clamp Block for mounting Double and Triple Bobs and eZee Battery Rails to Existing Bicycle Rack. Designed and Made in Canada.
Click Here for detailed product info page
36V 2.0A Lithium Battery Charger from ST NOTE: North America 120VAC ONLY
Click Here for detailed product info page
36V 2.0A Lithium Battery Charger from ST (Euro 220VAC)
Click Here for detailed product info page
- Out of Stock -
36V 2.0A Lithium Battery Charger 3 pin ST connector from 100-240VAC
Click Here for detailed product info page
36V 4.0A Lithium Battery Charger 3 pin ST connector from ST 100-240V/C8
Click Here for detailed product info page
48V Charger 2.0A ST3 Sealed Plastic Lithium Charger from ST, 110 - 220V compatible
Click Here for detailed product info page
52V 4.0A Lithium Battery 3 pin ST connector Charger for 100-240VAC Outlets
Click Here for detailed product info page
Upgrade to a Fast 8A Programmable Charger with the Satiator - Includes XLR-ST3 Adapter
Click Here for detailed product info page
New Model V4 Baserunner_L10 Field Oriented Motor Controller. Flat Profile Fits Many Downtube Battery Enclosures. L1019 Motor Plug. 70A Peak Phase Currents (~45-50A Continuous), for 24-52V Batteries (60V Max Input).
Click Here for detailed product info page
Grin Black Phaserunner Field Oriented Controller, New V3 Model with WP8 CA Plug - Black Shell with Molded L1019 Motor Connector. 90V Max and 96 A Peak Phase Currents (~45A Continuous).If you have a CA-DP you will need the WP8_JST adapter.
Full Product Information Page
Click Here for detailed product info page
- Out of Stock -
Grin Phaserunner Field Oriented Controller, New V3 Model with WP8 CA Plug - Stainless Silver Shell with Molded L1019 Motor Connector. 90V Max and 96 A Peak Phase Currents (~45A Continuous).If you have a CA-DP you will need the WP8_JST adapter.
Full Product Information Page
Click Here for detailed product info page
- Out of Stock -
ETA: Nov 15 2022
36-52V, 25A Sinewave Controller with ON/OFF switch, Proportional Regen. New Model with Waterproof L1019 Connector for Motor Plug and WP8 Cycle Analyst Connector. For direct-drive motors only, does not work well with high power geared hubs like the GMAC or eZee.
Full Product Information Page
Click Here for detailed product info page
- Out of Stock -
48V-52V, 35A Sinewave Controller with ON/OFF switch, Proportional Regen, and CA3 Connector. New Model with Waterproof L1019 Connector for Motor Plug and WP8 Cycle Analyst Connector. For direct-drive motors only, does not work well with high power geared hubs like the GMAC or eZee.
Full Product Information Page
Click Here for detailed product info page
- Out of Stock -
36-72V, 40A Sinewave Controller with ON/OFF switch, Proportional Regen, and CA3 Connector. New Model with Waterproof L10 Motor Connector and WP8 Cycle Analyst Plug. For direct-drive motors only, does not work well with high power geared hubs like the GMAC or eZee.
Full Product Information Page
Click Here for detailed product info page
- Out of Stock -
V3 Direct Plug Cycle Analyst with Waterproof 8 Pin HiGo CA Plug for Ready to Roll Kits.110 cm cable length. Mounting bracket not included.
Click Here for detailed product info page
Stainless Steel Mounting Plate for Attaching CA to Bicycle Steer Tube
Click Here for detailed product info page
Grin Tech Handlebar Mounting Bracket for Cycle Analyst, 100% Stainless Hardware
Click Here for detailed product info page
Multifunction Switch for CA3-WP, with On/Off Power, Up/Down Digital Aux Buttons, and Screen Toggle. 45 cm cable length.
Click Here for detailed product info page
50cm Thumb Lever Throttle, Universal Left / Right Side Design. Short Cable for Connecting to Cycle Analyst.
Click Here for detailed product info page
New Universal Lever Thumb Throttle with Clamp On Handlebar Mount
Click Here for detailed product info page
New Extra Slim Split Grin Twist Throttle, 36mm OD Fits Under Lever Shifters. 50cm cable length for CA3. Requires ID of Handlebar Tube 17mm or Larger. Won't Fit with Aluminum Handlebars with Thick Sidewalls.
Click Here for detailed product info page
New Extra Slim Split Grin Twist Throttle, 36mm OD Fits Under Lever Shifters. 50cm Cable Length for CA3. Requires ID of Handlebar Tube 17mm or Larger. Won't Fit with Aluminum Handlebars with Thick Sidewalls.
Click Here for detailed product info page
CA3 Compatible Quadrature PAS Sensor, Split 12 Magnet Ring for Square Taper Spindle Mount
Click Here for detailed product info page
CA3 Compatible Quadrature PAS Sensor, with Split 12 Magnet Ring for Chainring Mount. Must have Steel Chainring bolts. For 74mm 5 Bbolt and 64mm 4 Bolt Cranksets.
Click Here for detailed product info page
CA3 Compatible Mini PAS Sensor with 24 Poles for Immediate Engagement. For Square Taper Spindles with at Least 5mm of Exposed Spindle. Standard 90cm Cable Length
Click Here for detailed product info page
ERider-T9N Torque Sensor for 68mm BB Shells with 170mm Miranda Cranks and 4 Bolt 104mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included. NOTE: Certain ERider setups are succeptible to electrical noise from the controller causing intermittent cutout behavior. This can be solved by grounding the bicycle frame.
Click Here for detailed product info page
ERider-T9N Torque Sensor for 68mm BB Shells with 170mm Miranda Cranks and 5 Bolt 130mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included. NOTE: Certain ERider setups are succeptible to electrical noise from the controller causing intermittent cutout behavior. This can be solved by grounding the bicycle frame.
Click Here for detailed product info page
ERider-T9N Torque Sensor for 73mm BB Shells with 170mm Miranda Cranks and 4 Bolt 104mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included
Click Here for detailed product info page
ERider-T9N Torque Sensor for 73mm BB Shells with 170mm Miranda Cranks and 5 Bolt 130mm BCD Chainring Spider. Side Cable Exit.
Chainrings Not Included. NOTE: Certain ERider setups are succeptible to electrical noise from the controller causing intermittent cutout behavior. This can be solved by grounding the bicycle frame.
Click Here for detailed product info page
Sempu Torque Sensing Bottom Bracket for Fatbikes with 84mm wide BB's. Advanced PAS Kit Info Page
Click Here for detailed product info page
- Out of Stock -
NCTE Square Taper Torque Sensor (Similar to THUN), Standard Length 120mm Spindle Suitable for Most Bikes.
Click Here for detailed product info page
NCTE Square Taper Torque Sensor (Similar to THUN), Long 128mm Spindle.
Click Here for detailed product info page
NCTE Square Taper Torque Sensor (Similar to THUN), Extra Long 136mm Spindle.
Click Here for detailed product info page
Dual Left and Right Ebrake levers with Single JST Connector
Click Here for detailed product info page
Pull Tripwire, Universal Ebrake Sensor for Mechanical and Some Hydraulic Levers.
Full Product Information Page
Click Here for detailed product info page
Push Tripwire, Universal Ebrake Sensor for Most Hydraulic Levers. Full Product Information Page
Click Here for detailed product info page
Magura MT7e Brake and lever. Pre-Bled. 2200mm. Flip Flop lever. Cut to length.
Click Here for detailed product info page
- Out of Stock -
ETA: Feb 1 2023
Upgrade Motor with Statorade Injection for Improved Heat Conductivity. Full Product Information Page
Click Here for detailed product info page